Panasonic TH-37PA60E Service Manual page 33

10 Adjustment Procedure
10.1. Driver Set-up
10.1.1. Item / Preparation
1. Input a white signal to plasma video input.
2. Set the picture controls as follows.
Picture menu: Dynamic
P-NR: OFF
Aspect: 16:9
Caution
1. First perform Vsus adjustment.
2. Confirmation of Vscn voltage should be performed after
confirmation of Vad adjustment.
When Vad=-90V, Voltage of Vscn is 35V ±4V.
10.1.2. Adjustments
Adjust driver section voltages referring the panel data on the
panel data label.
Check or adjust the following voltages with the multimeter.
Name Test Point
Vsus TPVSUS Vsus ± 2V
(SS)
Ve TPVE (SS) Ve ± 2V
Vset TPVSET 232V ± 7V
(SC)
Vad TPVAD (SC) -90V ± 1V
Vscn TPVSCN Vad+125V ±
(SC) 4V
Vda TPVDA (SS) 70V ± 1V
Vdat P12-1, 5 (P) 70.2V ± 0.1V
PFC C446 (+)(-) 396V ± 0.5V
*See the Panel label.
33
TH-37PA60E / TH-37PD60B / TH-42PA60E / TH-42PD60B
Voltage Volume Remarks
R628 (P)
VR6000 (SS)
Fixed
VR6600
(SC)
Fixed
Fixed
R665 (P)
R443 (P)
*
*