Advertisement
Quick Links
Advertisement
Summary of Contents for FFS FMP-ETP
- Page 1 200 AND EVO ™ ™ FMP-ETP INSTALLATION GUIDE...
- Page 2 The information in this publication is provided for reference only. While every effort has been made to ensure the reliability and accuracy of the information contained in this manual at the time of printing, we recommend that you refer to “franklinfueling.com” for the most current version of this manual. All product specifications, as well as the information contained in this publication, are subject to change without notice.
-
Page 3: Table Of Contents
Contents Introduction ............................1 Conventions used in this manual ....................1 Questions and concerns ........................1 Operating precautions ........................2 Installation............................3 Install the printer ...........................3 Configure the console to use with the printer ................4... - Page 4 Intentionally Blank...
-
Page 5: Introduction
Introduction This guide contains the procedure for connecting the FMP-ETP to the EVO™ 200 or EVO™ 400 automatic tank gauge. IMPORTANT: The FMP-ETP printer is only approved for use with EVO™ 200 or EVO™ 400 automatic tank gauges. Conventions used in this manual... -
Page 6: Operating Precautions
Operating precautions Franklin Fueling Systems (FFS) equipment is designed to be installed in areas where volatile liquids such as gasoline and diesel fuel are present. Working in such a hazardous environment presents a risk of severe injury or death if you do not follow standard industry practices and the instructions in this manual. -
Page 7: Installation
1. Connect the included USB cable from the port in the middle of the printer to the USB port on the EVO™ 200 or EVO™ 400 automatic tank gauge. FMP-ETP Printer Ports EVO™ 200 and EVO™ 400 USB port 2. Push the cover opening lever and open the rear cover. -
Page 8: Configure The Console To Use With The Printer
Configure the console to use with the printer 1. Connect a computer to the EVO™ 200 or EVO™ 400, and open the FFS PRO® interface. (See the EVO™ 200 and EVO™ 400 Automatic Tank Gauges Programming Guide (part number 228180015) for more information.) 2. - Page 9 6. Click SAVE at the top of the page to save your settings. 7. Click REPORTS, and print a report to test that the configuration is successful.
- Page 10 Intentionally Blank...
- Page 11 Intentionally Blank...
- Page 12 228180045 r1...