MANUAL
COMPATIBLE WITH
• Yoga Swing
• Baby Swing
• Seat Swing
• Wrecking Swing
PRE-INSTALLATION
If your Swing is packaged with 2 foam coverings:
Slip them over the 2 rope sections at the very top of your Swing.
INSTALLATION:
YOGA AND NEST SWINGS
VULY MINI:
Remove the first set of carabiners and the Height
Adjustment Straps on both sides of the Swing.
Unlock the carabiners on your Swing, and hook them into
the lugs on the Swing Rail.
Ensure that both carabiners are facing the same direction
and have been firmly tightened.
VULY MAX:
Unlock the carabiners on your Swing, and hook them into
the lugs on the Swing Rail.
Ensure that both carabiners are facing the same direction
and have been firmly tightened.
CONGRATULATIONS!
Swings
• Bounce Swing
• Monkey Swing
You have attached your Swing onto your Vuly Swing Set.
• Nest Swing
If your Swing is packaged with 1 foam covering:
Slip it over the rope section at the very bottom of your Swing.
INSTALLATION:
BABY, BOUNCE, SEAT, WRECKING AND
MONKEY SWINGS
Unlock the carabiners on your Swing, and hook them into
the lugs on the Swing Rail.
Ensure that both carabiners are facing the same direction
and have been firmly tightened.
HEIGHT ADJUSTMENT
(EXCL. MONKEY SWING)
To lower: Lift your Swing and feed the rope(s) up
through the Height Adjustment Buckles until you reach
the desired height.
To raise: Lift the top(s) of the Swing rope(s) and feed
down through the Height Adjustment Buckles until you
reach the desired height.