Introduction; Package Content; Description - Wahlberg TrackRunner Upright User Manual

Introduction

Thank you for selecting the TrackRunner Upright, a DMX controlled motor system from Wahlberg
Motion Design. Before using the product for the first time, please read this manual carefully.
Failure in handling can cause injury of persons and/or damage the motor.

Package content

1× TrackRunner Upright
1× powerCon TRUE1 male plug NAC3MX-W(-TOP) for power cable?
1x User Manual
1x Cheat sheet

Description

The Track Runner Upright makes your moving heads or scenic elements fly or move smoothly
where speed, positing and range all are controlled via DMX directly from a lighting desk using a
wireless transmitter (accessory not included).
With the on-board mounting bracket, power and DMX outlets, it is easy to attach any DMX unit
you would like to control from the moving element.
It runs on the same track as our regular Track Runners. When the track is mounted on an upright
truss system there is no limit on how tall the upright track can be, except for the maximum range
of the wireless DMX signal.
Safety functions
The control system ensures that the motor is only powered when:
•
The DMX signal is reliable.
•
The wireless DMX transmitter is within range and linked to the unit
•
The speed control channel is on (more than 0%).
•
The motor is instructed to move.
•
No overload.
The product should only be operated by an experienced lighting-desk-operator. The lighting desk
must be programmed according to the manual, so the unit will stop when the speed is put to 0 %.
It is also possible for the user to stop the moving elements by disconnecting the mains power.
356.805.003
6
Date: 2019-04-04