KROM KLOUD Quickmanual Installation page 5

IOS DIRECTLY MODE CONNECTION
1. Press and hold "B" and "HOME" buttons: LED channel LED1+LED2+LED4 will be flashing. Device
is now pairing.
2. Enable your smart device's (tablet or smartphone) Bluetooth, look for "Krom Kloud" device
and click on it. LED Channel LED1+LED2+LED4 lights are still on, then the connection has been
successfully done.
IOS 13 MODE CONNECTION
1. Press and hold "Back" and "HOME" buttons: LED channel LED1 will be flashing. Device is now
pairing.
2. Enable your smart device's (tablet or smartphone) Bluetooth, look for "Xbox wireless
controller" device and click on it. LED Channel LED1 are still on, then the connection has been
successfully done.
SWITCH WIRELESS CONNECTION
1. Select "Controller" / "Change Grip and Order" menu on your Nintendo Switch.
2. Once the controller's LEDs are off, press and hold "Y" and "Home" buttons: all four LED
channel's lights will start flashing.
3. All four LED channel's lights will stop flashing to turn steady, indicating the connection has been
successfully done.