Table of contents What is sensiLight™ sensiLight™ device description User interface description Who should use and how to decide to use sensiLight™ When shouldn’t sensiLight™ be used Possible side effects Benefits User instructions Recommended treatment protocol What to expect when using sensiLight™...
What is sensiLight™ Long-term hair reduction – hair growth cycle The sensiLight™ device is an over-the- Two factors play an important role in counter device intended for the removal of optimal long-term hair reduction: unwanted hair. sensiLight™ is also intended •...
• sensiLight™ handheld device ON/OFF button and energy • External power supply selection button 1-3 energy Handheld description level lights Trigger button Skin tone and Status indicator: contact sensor · Lack of contact (Fitzpatrick sensor) ·...
User interface description The user interface and control capabilities include the following features: 1. ON/OFF and energy selection button – single button used for the device activation, deactivation and energy selection. • Pressing the button (after the device is connected to the power supply) will turn on the device at energy level 1.
Page 7
Indicator Mode No light Device not working (not connected to the power supply). “Blinking” Standby Device is in standby mode (before powering on or when green light left unattended for 3 minutes). 1-3 energy level Energy The three energy levels are indicated by three green LED lights level 1-3 lights.
• Do not use sensiLight™ if you are under • sensiLight™ is intended for use on the the age of 18. The use of sensiLight™ on or legs, underarms, bikini line, back and arms. by children has not been established and •...
Page 9
• Do not place, store or use sensiLight™ near • Do not use sensiLight™ if you are bathtubs, showers, basins or other vessels photosensitive or have other diseases...
Page 10
• Do not use sensiLight™ if you have an active implant such as a pacemaker, insulin • Do not use sensiLight™ if you have tattoos...
Skin redness make sure to apply SPF 30 or higher side-effects Skin sensitivity sunscreens. • Do not use sensiLight™ on the face. Skin burns • Do not treat the same area of skin more Scarring Rare than once per treatment as it may cause...
Page 12
• Pigment changes - Use of sensiLight™ sensiLight™ as you are unable to tolerate may cause temporary skin the hair reduction application.
Some hair may not you with complete safety and reassurance. be affected by sensiLight™ because of the The sensor continually evaluates your skin different hair growth phases. tone and allows sensiLight™ to perform only For permanent reduction in hair regrowth, on suitable areas.
User instructions Remember! sensiLight™ comes with a built- in skin-tone sensor, enabling the application sensiLight™ is intended for use on the legs, only on a suitable skin range. This unique underarms, bikini line, back and arms. safety feature will not let you treat areas...
Page 15
“preliminary test” section above. Do not treat the tested area for at least 1 week after the preliminary test is done. 1. To turn sensiLight™ on, press the ON/OFF 1. Select the lowest energy level and deliver button (see image - item ).
If sensiLight™ Important notes: is not properly applied or your skin tone • Try not to overlap pulses on the same is too dark/tanned, the indicator light will spot. Repeated pulses on the same spot be “blinking”...
Page 17
Some hair may not be affected Energy level should primarily be chosen by sensiLight™ because of the different based on your own comfort. hair growth phases. To remove this hair The energy levels vary from level 1 to level 3 multiple treatment sessions are required with a light fluence of 3-5 [J/cm2].
• If you do not plan on using your • Apply a calming lotion such as Aloe Vera. sensiLight™ for a long period of time, it is • Avoid using peeling and bleaching creams recommended to keep it clean and stored.
• In case of a general error, reset the • If sensiLight™ does not trigger a pulse: device – unplug the power cord from the • Verify there is full contact with the skin.
Device specification Storage instructions parameters Emitted light spectrum: Storage and transport conditions 475[nm] to 1,200 [nm] max. -10 º C to 70 º C (14 º F to 158 º F) Temperature Emitted energy flux: 5 [J/cm²] 0 to 90% RH at 55 º C (131 º F) Humidity Selectable energy levels: 3 levels Treatment area (window): 3 [cm²]...
Double insulation Please read all warnings and safety Type BF equipment precautions prior to use Do not use sensiLight™ device Consult Instructions for use on tanned skin or after sun exposure Keep dry. Do not let the device become wet. Keep away from...
Page 24
Fitzpatrick skin type scale Do not use sensiLight™ on naturally dark skin types. Sensica By Home Well Trading Ltd. Omar Hodge Building, Road Town, Tortola, VG1110, BVI USA Agent representative: Viora Inc., 392 Summit Avenue, Jersey City, NJ07306, USA 201-706-7078 201-210-5786 support@sensica.com...
Need help?
Do you have a question about the sensiLight and is the answer not in the manual?
Questions and answers