Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-0568
GETAC V110 CRADLE
This instruction sheet is for the V110 cradle only. For instructions on features, set-
up, and operation of the V110 computer, please refer to the manual provided by
Getac with the computer.
This cradle is designed to be used with a variety of Gamber-Johnson mounting
systems. Installation instructions for other Gamber-Johnson products are provided
with each individual product.
This instruction sheet is for the following products:
Item No. 7160-0568-XX Cradle - Getac - V110
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Revision
REV. C
Printing Spec: PS-001
Form
INST-645
page 1/3
Advertisement
Related Manuals for Gamber Johnson GETAC V110 CRADLE
Summary of Contents for Gamber Johnson GETAC V110 CRADLE
- Page 1 Form 7160-0568 REV. C INST-645 GETAC V110 CRADLE Printing Spec: PS-001 This instruction sheet is for the V110 cradle only. For instructions on features, set- up, and operation of the V110 computer, please refer to the manual provided by Getac with the computer.
- Page 2 V110 CRADLE FEATURE IDENTIFICATON Screen Support Tri RF Version only Lock Button Rear Hooks Latch Front Hooks Guide Blocks Stylus Holder Bumpers Deck 2X 6-32unc inserts- 4X 1/4-20unc x .62" Screen Support mounting studs mounting position VESA 75mm (on right and left) page 2/3...
- Page 3 INSERTING AND REMOVING THE COMPUTER INSERTING THE COMPUTER Un-latch the cradle, making sure the rear hooks move backward (Figure 1). With the computer held at an angle, place the two notches on the front edge of the computer into the front hooks. Figure 1 (Figure 2) Lower the computer down on to...