Table of Contents
Advertisement
Turning a sign on and off
When you plug in the sign's power supply, the sign starts up
automatically, and unplugging the power supply turns the sign off.
However, instead of unplugging a sign, there is another way to turn a
sign off:
Using the Remote Control, hold down SHIFT and then press PROGRAM to turn a
sign off and on.
NOTE: Messages that you have programmed into the sign will not be lost
when you turn a sign off. Messages will be retained for up to 30
days if the sign is not powered.
When you turn a sign on, information similar to the following will be
displayed:
1022-6801A
16X8C SMART
64K RAM
Basic sign operation: Turning a sign on and off
Basic sign operation
Model number of the sign.
TUESDAY
3:12 PM
APRIL 15, 1997
SERIAL ADDRESS =
User Manual for ALPHA Director with Smart Alec option
Total amount of RAM in the sign.
The time set in the sign.
000
The date set in the sign.
Serial address
of the sign
(typically a
number from
00 to 99).
This number is
used to
provide a
unique identity
to a sign on a
network.
19
Advertisement
Table of Contents
