Page 2
KC-098 Intelligent Stud Scanner has the function of alarm for AC live wires, when it detects the AC live wires out, the live wires caution light at the top of the tool will illumine, meanwhile this will not affect detection for joists or metals, disregard that the function switcher is set in the mode of joists or metals.
Page 3
OPERATION INSTRUCTIONS Battery Open the battery compartment door on the back of the scanner, and plug one 9 Volt block battery onto the battery connector and put the battery back to the compartment. Close the battery compartment door. Calibration The tool should be calibrated on the surface of the detected object before detecting: A.
when moving, reset automatic calibration and detection from another place). c. If the edge of joists are detected, the center light will illumine and the beeps will rings, at this tim e, make a mark on edge of detected object through the marker aperture by pencil.
TECHNICAL SPECIFICATIONS Name Intelligen t Stud Scanner Type KC-098 Object of detection Joists, AC live wires and Metals Joists Thickness of wall is 19mm(3/4 inches). Detection AC live wires...