Telldus 14191 Quick Manual

1. CONNECT TO A REMOTE CONTROL

KOPPLA IHOP MED EN FJÄRRKONTROLL
1.1
1.
Press/tryck/trykk/
paina/drücken
7 sec

2. CONNECT OUTLET TO TELLDUS LIVE!

KOPPLA UTTAG TILL TELLDUS LIVE!
KOBLE MOTTAKERE TIL TELLDUS LIVE!
2.1
live.telldus.com
Control
Devices
2.3
Add new device wizard
Select your device type:
433,92 MHz receivers
2.5
Add new device wizard
Select your device model:
Self Learning On/Off
2.7
WARNUNG: Nur zur Verwendung inInnenräumen. Spannungsfrei nur mit
abgezogenem Stecker. Nicht hintereinander stecken. Nur in trockenen
Räumen verwenden. Empfängerkategorie: Klasse 3
2.9
Control
Devices
Window lamp
2.
BLINK BLINK BLINK etc. (15s)
live.telldus.com
live.telldus.com
Secure
Group
live.telldus.com
230V~ 50Hz
live.telldus.com
Manage Trigger Setup
Scheduler Events Locations
off on
KOBLE TIL EN FJERNKONTROL
LIITÄ KAUKOSÄÄDIN
1.2
1.
Within/inom/innen/
kuluessa/drinnen
15 sec
Requires a TellStick and a Telldus Live! account
LIITTÄÄ VASTAANOTTIMEN TELLDUS LIVE!
EMPFÄNGER MIT TELLDUS LIVE! VERBINDEN
2.2
Add a new device
2.4
Add new device wizard
Select your device brand:
2.6
Add new device wizard
Enter name:
Name:
* Any name may be used/Valfritt namn/Valgfritt namn/
Nimi on vapaa valinta/Jeder Name kann verwendet werden
2.8
Add new device wizard
1. Install the outlet as explained under "Installation" in the manual.
2. Keep the outlet programming button pressed for 7 seconds. The LED
blinks slowly.
3. Press the learn button below within 15 seconds to link the outlet.
(The programming mode is automatically disabled if no pairing signal is
received.)
4. The connected lamp blinks three times as confirmation.
2
Learn
If the paring fails, repeat steps 2-4 again. The distance to the receiver may
have to be shorter when pairing than during ordinary use.
FOLLOW US ON SOCIAL MEDIA FOR
EVENTS, OFFERS AND INSPIRATION!
EINE FERNBEDIENUNG
ANSCHLIESSEN
2.
<CLICK, CLICK>
live.telldus.com
live.telldus.com
live.telldus.com
Window lamp
Next
live.telldus.com
Done
1
3