Table of Contents
Advertisement
Quick Links
User Manual
Automatic Lead Acid / Lithium Car Battery Charger HT800
• Automatic charging with IU-curve
• Automatic trickle charge
• Short circuit, wrong polarity, high battery voltage, over temperature
and safety time protection
• Precharge mode (to regenerate deep-discharged batteries)
Batterie Types:
• 6-12V Lead-acid battery (Wet, Gel, MF und AGM) 1,2Ah - 26Ah
+
• 12,8V Lithium (4-cells LiFePO4) 2-15Ah
-
Charging current: 0,8A
Input: 220-240V / 50Hz - 300mA
Only for use at dry areas!
Protection class: IP20
Art.-Nr.: 09001543 Ver.20190709
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HEITECH HT800
Summary of Contents for HEITECH HT800
- Page 1 User Manual Automatic Lead Acid / Lithium Car Battery Charger HT800 • Automatic charging with IU-curve • Automatic trickle charge • Short circuit, wrong polarity, high battery voltage, over temperature and safety time protection • Precharge mode (to regenerate deep-discharged batteries) Batterie Types: •...
- Page 2 Input: 220-240V~ 50 Hz 0,3 A Output: 12V DC 0.8A 6V DC 0.8A 12.8V DC 0.8A Charges: 1 - 6/12V Lead Acid Flooded, Gel, Maintenance-Free, AGM Batteries 1,2Ah - 26Ah 2 - 12.8V Lithium Iron Phosphate (LiFePO4) 2Ah-15Ah Thank you for purchasing our product. Read the instruction manual thoroughly before use and keep the manual for later reference.
- Page 3 3. Do not expose charger to rain, snow or moisture. 4. Operate charger only in well-ventilated areas. Batteries generate explosive gases during normal operation. 5. Wear eye protection when operating charger. 6. Never use an extension cord or any attachment not recommended by manufacturer, otherwise this may result in a risk of fire, electric shock or personal injury.
- Page 4 or cleaning. Use lint-free cloth to clean the surface, do not immerse into water. 13. This equipment can be used by children of 8 years and older and by people with limited physical, sensory or mental capacities or those with no experience and knowledge if they are supervised or have received instruction in how to use the equipment safely and understand the dangers which result from such use.
-
Page 5: Safety And Precautions
SAFETY & PRECAUTIONS 1. Someone should be within range of your voice or close enough to come to your aid if you have an accident. 2. Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing or eyes. 3. - Page 6 batteries only. Do not attempt to charge any other type of battery. Charging other battery types may cause injury to persons and damage to property. 9. NEVER USE THE RECOVER MODE FOR A LITHIUM IRON PHOSPHATE BATTERY. WARNING: Battery terminals, terminals and related accessories contain lead. Lead compounds are carcinogenic and damage the reproductive system.
-
Page 7: Charging Modes
CHARGING MODES The HT800 has three (3) modes. The Lithium charge mode requires the mode button to be pressed and held for three (3) seconds to enter the enhanced mode. This “Enhanced” mode requires your full attention before selecting. Do not operate the charger until you confirm the appropriate charge mode for your battery. - Page 8 CONNECTING TO BATTERY 1. Set any charger switches to “off” position and remove AC cord from electric outlet before connecting or disconnecting DC output clamps or eyelets. Never allow clamps or eyelets to touch each other. The battery terminal not connected to the chassis has to be connected first. The other connection is to be made to the chassis, remote from the battery and fuel line.
- Page 9 5. Determine which post of battery is grounded (connected) to the chassis. If negative post is grounded to the chassis (as in most vehicles) see (6). If positive post is grounded to the chassis, see (7). 6. For Negative-grounded vehicle, connect POSITIVE (RED) clamp or eyelet connector from battery charger to POSITIVE (POS, P, +) post of battery.
-
Page 10: Preparing To Charge
PREPARING TO CHARGE 1. If necessary to remove battery from vehicle to charge, always remove grounded terminal from battery first. Make sure all accessories in the vehicle are off, so as not to cause an arc. 2. Be sure area around battery is well ventilated while battery is being charged. 3. - Page 11 Charging steps (charging Voltage & charging current):...
-
Page 12: Starting The Charging Process
The battery charger must be connected to the battery according to the instructions above. STARTING THE CHARGING PROCESS: 1. Once you have established that the battery clamps or eyelets have been correctly connected, you can start the charging process. To do so, insert the charger plug into the AC socket. - Page 13 STATE OF CHARGE INDICATORS The state-of-charge (SOC) LED display has four (4) SOC indicators. EXPLANATION The LED will flash when the battery is less than 25% Red LED 25% charged. When the battery is 25% charged, the LED will be solid. The LED will flash when the battery is less 50% Orange LED than 50% charged.
-
Page 14: Troubleshooting
TROUBLESHOOTING Error conditions are indicated in the LED display. REASON/SOLUTION ERROR Standard Charging The battery is not accepting a charge. Mode Change charge mode to Recovery Mode. Solid Red LED Recovery Mode The battery cannot be recovered. Battery capacity may be too high for the selected mode. Verify the Flashing Yellow LED battery capacity and charge mode. - Page 15 Limited 3 Year Warranty: Warranty Disclaimer Heitech Promotion GmbH assumes no liability and provides no warranty for damage resulting from improper installation. This product is warranted to be free of defects in material and workmanship for 3 years from date of purchase, dated receipt required.
- Page 16 Packaging materials are raw materials and can be recycled. Your responsible administration will be glad to provide details of the addresses and opening hours of collection points. HEITECH Promotion GmbH Krefelder Strasse 562 D-41066 Mönchengladbach Tel +49(0)2161-47763-0 Fax +49(0)2161-561 746 www.heitech-promotion.de...
Need help?
Do you have a question about the HT800 and is the answer not in the manual?
Questions and answers