Advertisement
Quick Links
URBAN-X Mini Installation Guide
•
Lightweight and durable design
• Excellent efficiency >110lm/W
• The luminaires are Class 1 for insulation
Safety Warnings
Eye Safety:
Caution – EN62471 Risk Group 2 Classification - Possible hazardous optical
radiation emitted from this product. May be harmful to eyes, do not stare at the
lamp. Hazard Distance is 1,480mm.
Warning: High Voltage product
All Electrical Installation work to be performed by a suitably qualified person in
line with the local regulations.
Risk of electric shock - isolate mains before removing cover.
Mechanical Installation:
Ensure unit is mounted securely to prevent risk of injury and the supply cord is installed as
per the instructions.
Box Contents
•
Urban-X Mini luminaire
•
Fixing Grub screws Qty 2
• Cable gland and nut (if supply cable not fitted)
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
•
Intelligent driver programs
•
5-year warranty
•
The luminaires are suitable for use
Outdoors and Indoors
www.rayteccctv.com
Advertisement
Related Manuals for Raytec URBAN-X Mini Series
Summary of Contents for Raytec URBAN-X Mini Series
- Page 1 Risk of electric shock - isolate mains before removing cover. Mechanical Installation: Ensure unit is mounted securely to prevent risk of injury and the supply cord is installed as per the instructions. Box Contents • Urban-X Mini luminaire • Fixing Grub screws Qty 2 • Cable gland and nut (if supply cable not fitted) Raytec Global Tel: +44 (0) 1670 520055 www.rayteccctv.com Americas Tel: +1 613 270 9990...
- Page 2 Torque to 4Nm to ensure the environmental seal • DALI connection (when used): The additional cores should be stripped to 8.5mm - 9.5mm and suitably terminated Connect directly to the driver terminals labelled DA(BL) Blue. The connection is non-polarity sensitive www.rayteccctv.com Raytec Global Tel: +44 (0) 1670 520055 Americas Tel: +1 613 270 9990...
- Page 3 *ID4 - Active Dimming 25%: 100% output (5 second soft start) from power up, then dims to either 50% (ID3) or 25% (ID4) power, around the midpoint of the night and up to a maximum of 6 hours after, then back to 100% if it’s still dark. This program would typically require the use of an inbuilt or remote photocell to monitor the hours of darkness. ID5 - Event Trigger: The luminaire will operate at 100% for 30 minutes and then switch off until re-activated Custom: A customer specific program. Not suitable for locations where the length of night is 23 hours or greater. For the first 3 nights the luminaire is on at 100% power from sunset to sunrise whilst the system learns the length of nights. Unit does not compensate for variations within local time zones. Unit does not compensate for international clock changes. Raytec Global Tel: +44 (0) 1670 520055 www.rayteccctv.com Americas Tel: +1 613 270 9990...
- Page 4 • Check mains input • Check all mains wiring connections are correct 315mm (12.3") 130mm (5.2") • Check photocell is working (if fitted) • Check Driver Program • Check luminaire physical alignment • If DALI controlled check DALI communications and connections • Call Raytec for further assistance *Model shown without photocell fitted* www.rayteccctv.com Raytec Global Tel: +44 (0) 1670 520055 Americas Tel: +1 613 270 9990...