Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for HiWeigh RDS
- Page 1 Remote Display User Manual v.201602 An ISO9001 registered company @No.335 Haishen, Xingxin Road, Huinan Town, Pudong District, Shanghai 201301, China www.hiweigh.com All rights reserved, specifications subject to change without notice...
-
Page 3: Before Use
Before Use Safety precautions WARNING! ▲ Do not use RDS remote display in hazardous area! Do not use it within areas classified as hazardous division 1/2 or zone 0/1/2/21/22 because of combustible or explosive atmospheres. Never immerse it in corrosive chemical liquid. Static sensitive device, it must be handled only by qualified technicians. Improper handling may damage the circuit card and the device, which is not covered by the warranty. DANGER! Electric shock hazard! Make sure the display is grounded well. Always unplug AC/DC adapter before performing any service work on the display! And wait for at least 30 seconds before any operation on it. DISPOSAL In conformance with the European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), this device may not be disposed of in domestic waste. This also applies to countries outside the EU as per their specific regulations. Please dispose of this product in accordance with local regulations at the collecting point specified for electrical and electronic equipment. If you have any questions, please contact the responsible authority or the distributor from which you purchased this indicator. Should this indicator be passed on to other parties (for private or professional use), the content of this regulation must also be related. All Rights Reserved, any copying, reproducing, republishing, posting, distributing by any means is prohibited without permission of HIWEIGH TECHNOLOGIES LIMITED and MOORANGE ELECTRONICS (SHANGHAI) MFG Co.,LTD.. - Page 4 Index Technical Specifications Model Identification Packing List Connecting Operation Protocols List A. End with cr If B. End with cr C. Start with <STX>, end with cr If D. Start with <STX>, end with cr Start with <STX>, end with <EXT> Start with = G. End with If H. Others...
-
Page 5: Technical Specifications
1. Technical Specifications Model RDS Enclosure Type Aluminum Product Dimension 480 x 110 x 40mm Digits Height 3” LED x 6 (76.2mm) Power Source 110V - 13V0.7Ah or 220V – 13V/0.7Ah Working Protocols Mettler Toledo*, Cardinal*, CAS*, HBM*, AND*, GSE, Ricelake*, etc. Operating Temperature -10 ~40 Storage Temperature -25 ~55 Relative humidity 85%Rh non-condensing Protection IP54 Weight 2.8Kg 2. Model Identification Model: RDS- A - UK 0 0 Corresponding: A B C D E A = Main model name B = Enclosure: -A (or none): Aluminum -S: Steel... -
Page 6: Operation
GND (black) Pin2 ……………… RX (red) For 9-pins DB9 connector Pin2 ……………… RX (red) Pin5 ……………… GND (black) 5. Operation Connect the RS232 cable firstly between the indicator and the RDS display, as above figures, and then plug the power cable, it will detect the baud rate and protocols automatically, if it detects the correct baud rate and protocol, it will display the same weight as the indicator simultaneously; if the data is incompatible with the protocols of RDS, it will display No Signal or Error 6. Protocols List It can work with the below protocols, if your protocol is not in the list, you can send us your data format (in hex) of below weight: Positive with decimal point, eg.: 20.00kg (in hex) Positive without decimal point, eg.: 20kg (in hex) Negative with decimal point, eg.: -20.00kg (in hex) Negative without decimal point, eg.: -20kg (in hex) A. End with cr If (Hex = 0D 0A) Moorange K3 K5 Protocol 1 ST,GS 87,g (hex format 53 54 2C 47 53 20 20 20 20 20 20 38 37 2C 67 20 0D 0A) - Page 7 TSCALE* G S -/ CR LF G -/ CR LF G S -/ CR LF G -/ CR LF DINI ARGEO* -10.0kg (hex= 53 54 2C 47 53 2C 20 20 20 2D 31 30 2E 30 2C 6B 67 0D 0A) -83kg (hex= 53 54 2C 47 53 2C 20 20 20 20 20 2D 38 33 2C 6B 67 0D 0A) -83.5kg (hex= 53 54 2C 47 53 2C 20 20 20 2D 38 33 2E 35 2C 6B 67 0D 0A) 78.1kg (hex= 53 54 2C 47 53 2C 20 20 20 20 37 38 2E 31 2C 6B 67 0D 0A) Others 1. ST,NT,+123.456,Kg,<CR>,<LF 3.12kg/lb <SP> <SP> <SP> <SP> <CR> <LF> -3.12kg/lb <SP>...
- Page 8 0.000kg/lb <CR> <LF> 100.000kg/lb <CR> <LF> -99.999kg/lb <CR> <LF> 0kg/lb <CR> <LF> 950kglb <CR> <LF> 50000kglb <CR> <LF> B End with cr (Hex = 0D) Bilanciai* BT800 3840kg: + 3840 (hex= 2B 20 20 20 33 38 34 30 0D) -3840kg: - 3840 (hex= 2D 20 20 20 33 38 34 30 0D) 3.84kg: + 3.840 (hex= 2B 20 20 33 2E 38 34 30 0D) -3.84kg: - 3.840 (hex= 2D 20 20 33 2E 38 34 30 0D) CARDINAL* 36335kg (hex= 20 20 33 36 33 33 35 20 4B 47 20 47 20 20 20 20 0D) -36335kg (hex= 2D 20 33 36 33 33 35 20 4B 47 20 47 20 4D 4F 20 0D) C Start with <STX> (Hex= 02), End with cr If (Hex= 0D 0A) TOLEDO* Z3 0 7480 0000 (hex= 02 7A 33 20 20 30 37 34 38 30 20 30 30 30 30 30 0D 0A) LINEAR* PM02...
- Page 9 <SP> <SP> <ETX> 2345.99kg/lb <STX> <SP> <SP> <SP> <SP> <SP> <ETX> -12345.99kg/lb <STX> <SP> <SP> <SP> <SP> <ETX> 0.00kg/lb <STX> <SP> <SP> <SP> <SP> <SP> <SP> <SP> <SP> <ETX> (hex= 02 20 33 38 35 32 30 03) F Start with = (Hex= 3D) HIWEIGH X1 X3 X5 X6 X8 | Moorange K7 586g =685 (hex= 3D 36 38 35 20 20 20 20 20) YAOHUA* A12 0.000g =000.000 (hex= 3D 30 30 30 2E 30 30 30)
- Page 10 0.001g =-0.001 (hex= 3D 31 30 30 2E 30 30 2D) YAOHUA* D2+ 1.36kg =63.10000 (hex= 3D 36 33 2E 31 30 30 30 30) G End with If (Hex= 0A) 21.970 23 31 20 32 31 2E 39 37 30 30 0A -0.300 23 31 2D 30 30 2E 33 31 30 30 0A H Others 0.0 0 330602.9 3 24.33 2 -18.5 -0.8 -2566.99 *For all brands listed here, if not marked specifically, all copyrights belong to the owner or the company who registered or owned it completely, if any info in our manual not correct or wrong, please send mail to info@hiweigh.com for modifying or deleting, thanks.
- Page 12 User Manual An ISO9001 registered company @No.335 Haishen, Xingxin Road, Huinan Town, Pudong District, Shanghai 201301, China www.hiweigh.com All rights reserved, specifications subject to change without notice...
Need help?
Do you have a question about the RDS and is the answer not in the manual?
Questions and answers