Page 3
2. Never obstruct the unit or place it near any objects or liquids that may damage the unit. iFi audio suggests downloading and installing the MUZO Player App* on your iOS/Android device rst to enable you to operate the playback options on the Aurora.
Page 4
Note: Auto-Protection mode When the Aurora is playing at an excessively high volume, it may enter 'Auto-Protection' mode (volume level will be automatically reduced) to avoid 'clipping' so that the driver units and the ampli er are not damaged. No harm to the equipment should ensue.
Page 5
3.5mm DC 12V/20A INPUT COAXIAL OPTICAL Aurora CAUTION ATTENTION Technology licensed from AMR-Audio, UK AirPlay Assembled in China 1. Automatic Room Tailoring 5. 3.5mm(AUX) input 6. Coaxial input (ART Ultrasonic Sonar) 7. Optical input 2. RCA(AUX) input 8. LAN input 3.
Page 6
1. The rear IEC or 12v socket is for connecting to a power source. 2. For a wired Internet connection, connect a LAN/Ethernet cable from the Aurora to the router. 3. For a wireless Internet connection, if your router has a WPS button, simply press and pair.
Page 7
1. Power ON (via AC power cable or 12V/20A source such as marine mains power) 2. Select Bluetooth input on the Aurora 3. Pair via ‘iFi Hi-Res audio’ on your Smart device Bluetooth menu 4. Once paired, select the music app such as Spotify or Apple Music.
Page 8
Set-top Box Blu-Ray/DVD/CD Player Router SDHC Micro card 3.5mm DC 12V/20A INPUT COAXIAL OPTICAL Auto/Marine Aurora Power Supply CAUTION ATTENTION Technology licensed from AMR-Audio, UK AirPlay Assembled in China HDD, USB memory stick Echo Dot...
Page 9
4. Volume control 5. Previous/Next (only available in WiFi mode*) 6. Play/Pause 7. Brightness 8. Input 9. ART Auto Room Tailoring (HOLD for 3 secs to switch between ART/Audiophile modes) 10. TrueBass 11. Battery compartment Aurora *Depends on the software player support...
Volume Control Volume can be adjusted by using the front touch bar on the Aurora, the included remote control or the MUZO Player App*. Input selection Analogue Inputs RCA/Co-axial – connect left & right cables from an analogue source such as a CD player.
Page 11
Network Attached Storage (NAS) source. Use the MUZO Player App* to stream Spotify (incl. Connect), TIDAL, Napster, QQ Music and many more. Optical – derive signal input straight from a TV so the Aurora acts as a sound bar. Coaxial – connect an SPDIF source such as a Blu-ray player.
Page 12
** FAT32 - formatting past the Windows 32GB limit 1) The Aurora reads FAT32 only (not NTFS/ExFat/HPF+) 2) OS X formats FAT32 regardless of size. 3) Windows OS by itself is unable to format a drive above 32GB. Third party utilities are required.
Page 13
For maximum musical enjoyment, we need well thought out room correction for any audio system. This is EVEN more prevalent with a one-box solution such as the Aurora as all similar one-box products sound like a mono source because they are….a mono source.
Page 14
Most room correction uses DSP. iFi does not use DSP of this k ind in any of its products. The Aurora incorporates sound-matrix technologies that operate entirely in the analogue domain.
Page 15
The TrueBass system, incorporating the two downward- ring bass radiators, ensures that the Aurora delivers genuine bass with realistic depth and de nition. Dual- level depth control means you can adjust the bass response according to taste –...
Page 16
The iFi current multiplier circuit is entirely different because the switching frequency is xed at an ultra-high level - around 1.5MHz, hence it has ultra-high resolution. This results in a high level of efficiency, multiplying the current supplied by the valve several thousand-fold, whilst maintaining far greater linearity and lower noise than typical switching ampli ers.
Need help?
Do you have a question about the AURORA and is the answer not in the manual?
Questions and answers