Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for RVi RVibrake3
Summary of Contents for RVi RVibrake3
- Page 1 SETUP & USER GUIDE...
-
Page 2: Table Of Contents
Warranty: pg. 9 Limited Warranty: 9 • How long is the warranty? • What is covered? • Where or how do I get assistance for my RVibrake3 • What is not covered? • How state laws may apply Contact Information: pg. 9... -
Page 3: Welcome
RVing experience even more and could even save a life. The use of RVibrake3 or any of its accessories in a manner inconsistent with these instructions could cause damage to the motorhome or towed vehicle, and may cause serious injury or even death. -
Page 4: Rvibrake3 Setup
5) On the new screen, enable RVibrake3 by toggling the on/off slider to ON. At this time, the tablet will walk you through pairing. 6) You will be asked to pair to RVibrake3 by taking a picture of the QR code on the back of this User Guide. -
Page 5: Setup Steps
Failure to do so can result in tire damage or excessive brake wear. 1) In the vehicle being towed, adjust the driver’s seat to the far back position and place RVibrake3 on the floorboard so the black brake pedal claw is directly in front of the brake pedal. -
Page 6: Remove Rvibrake3
2) Remove the claw from the brake pedal. 3) Retract the air cylinder to the home position by lifting up the cylinder and sliding it back so the claw legs are placed into the two holes of the RVibrake3 housing. -
Page 7: Rvibrake3 Settings
Choosing Panic Only means RVibrake3 will only participate in emergency brakings. ALERTS & WARNINGS Make sure to heed all warnings and alerts from the Command Center tablet or audio prompts from RVibrake3. Failure to do so could result in brake damage. -
Page 8: Rvibrake3 Operations
Now that RVibrake3 is set up and settings are selected, it’s time to start towing. The purpose of RVibrake3 is to take the weight of the towed vehicle off of the motorhome in a braking and reduce stopping distance. RVibrake3 is activated by an accelerometer that detects changes in inertia, the same force that draws your chest forward in a braking. -
Page 9: Troubleshooting
Q. I have to disconnect my battery for towing. Can I power the RVibrake3 with the motorhome from my umbilical cord? A. You never want to power your RVibrake3 off of the motorhome. If you have a breakaway, then the RVibrake3 no longer has power. You need it connected to the towed battery. -
Page 10: Compliance
COMPLIANCE Antenna Usage This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 11: Warranty
The warranty will not cover damage resulting from neglect or misuse of the product, use contrary to operating instructions, or disassembly, repair, or alteration by any person other than RVi’s repair department. RVi is not liable for any incidental or consequential damages for breach of any expressed or implied warranty on the product. - Page 12 Pairing QR Code Note: Keep this User Guide in case of possible re-pairing in the future. rvibrake3.com...
Need help?
Do you have a question about the RVibrake3 and is the answer not in the manual?
Questions and answers
Good morning! My RVi3 randomly applies the tow car’s brakes going up hills. Then I got an error code 03. ???? What should I do?