LINC PANORAY
RIGHT SECTION
S WI T C H BO A RD TA B - E D I TI N G THE FUN C TI O NS
There are two ways to select or edit which functions are displayed in the
switchboard tab:
1. Pressing the pencil icon touch-point (next to the "SWITCHBOARD"
name) when viewing the Switchboard tab, like the example below.
2. Press-and-Hold on the tab button on the Helm Command keypad
when the operator has a function highlighted in the Switchboard tab
(Radio Source is highlighted in the example below).
(see following pages for further instructions)
OR
PRESS
& HOLD
45