Related Manuals for OneRemote Beolink 1000
Summary of Contents for OneRemote Beolink 1000
- Page 1 Beokompatible functions OneRemote Interface type 2530 Technisat Digicorder Made in Denmark by www.oneremote.dk...
- Page 2 Green function Yellow function Red function Blue function Operating using a Beolink 1000 or other old remote controllers. Older remote controls do not have coloured Exit/ back buttons, and use is not logical. SFI/ EPG As Beolink 1000 has no coloured buttons the...
- Page 3 Congratulations With a OneRemote INT controller from www.oneremote.dk built in to your device, you can connect the device to any Bang & Olufsen TV and fully operate it your Bang & Olufsen remote control terminal. This guide explains how.
- Page 4 Scart cable, therefore no further cables is needed. With a OneRemote OneWay or TwoWay cable, the device can be placed up to 25 metres away from the TV. It could be placed in another room, under a sofa or where ever it suits, as operation is handled via the Scartcable.
- Page 5 The same goes with the other 3 coloured buttons. This way we have freed the direct function of the coloured buttons, to important operations. In a OneRemote environment the red button is used as Back, Backup or return. The green button is used as EPG, Guide or similar. Finally the blue and yellow button is used for programme stepping.
- Page 6 Option programming The OneRemote controller inside your device can be programmed with different options, to fit different setup and needs. An option programming is done by pressing a series of buttons in a special scheme that does not occur during daily use. A programming must be ended within 3 seconds.
- Page 8 2530u2uk...