DEGA S1 III Instructions

Light panel

Advertisement

Instructions
Light panel
DEGA PANEL S1 III
Reproduction of these operating instructions or parts thereof in any form without the prior
written permission of DEGA CZ s.r.o. is prohibited
Company DEGA CZ s.r.o. reserves the right to change the specifications of the hardware and
software described in this manual at any time without notice
Company DEGA CZ s.r.o. shall not be liable for damages resulting from the use of the device

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S1 III and is the answer not in the manual?

Questions and answers

Summary of Contents for DEGA S1 III

  • Page 1 Company DEGA CZ s.r.o. reserves the right to change the specifications of the hardware and software described in this manual at any time without notice Company DEGA CZ s.r.o. shall not be liable for damages resulting from the use of the device...
  • Page 2 Degree of cover protection: IP 54 Environment of use: BE1 - environment with no explosion hazard Product description DEGA PANEL S1 III – illuminated panel used to inform the operator of the imminent gas leak. No text is visible when idle.
  • Page 3 Installation and connection of cabling Installation Loosen the screws Release from the latches around the perimeter of the panel and lift the lid Using a screwdriver, cut openings for PG11 grommets at the Fasten to the wall with 4 screws desired location Connect according to the diagram Put on the lid, snap the latches...
  • Page 4 The complete wording of the General Terms and Conditions and the Complaints Procedure can be found at www.dega.cz Manufacturer: DEGA CZ s.r.o., Malešická 2850/22c, 130 00 Prague 3, the Czech Republic VAT ID: CZ 279 029 43, ID: 279 02 943; Phone: +420 774 447 660, E-mail: info@dega.cz , Web: www.dega.cz © 2018 DEGA CZ s.r.o.

Table of Contents