Advertisement
Connecting the Cable to Indoor Unit (Pac)
• The inside and outside connecting cable can be connected after opening the side inlet grille.
1. Open the side-inlet grille manually (Fig. 1)
2. Open the panel (A) with driver (
3. Connect the connecting pipe (Fig. 3)
4. Connect the cables (LG doesn't supply) to the terminal block in the front panel. (Fig. 3)
5. Secure the panel (A) to the original position with the screw (
6. Insert the plastic tube (bushing) in small hole in order to prevent the connecting wires
from
being cut by sharp edge of the hole.(Fig. 4), America, Canada only.
7. Close the side-inlet grille.
Fig. 1
Fig. 3
Fig. 4
Connecting the Cable between Indoor Unit and Outdoor Unit
) (Fig. 2)
"B"
Plastic tube
(Bushing)
).
Fig. 2
"A"
Wiring Details(B)
1(L) 2(N)
3 4 5
To Outdoor Unit
Installation Manual 15
Advertisement
