Chapter 2. Introduction To The Front And Rear Panels; Front And Rear Panel Description - Keatec Energy Battery Tower T Series User Manual

Chapter 2.
The B Series BT are designed for use with the T Series UPS. T Series BT dimensions are W 250
* H 868 * D 900 mm. The T Series BT is configured to output ±120V, supplied by up to four groups
of batteries connected in Series as BAT+, BATN, BAT–.
2.1.

Front and Rear Panel Description

1. DC Breaker
2. EXT.BAT. +/-
3. Ground
KE 4256-1251 T Series Battery Tower UL for T Series UPS 10-15-20 kVA 208 Vac Users Guide English 20190121
This manual is for authorized personnel only.
Introduction to the Front and Rear Panels
2
T 10A 80-009-120 BT-NB-UL
1. Battery Overcurrent Protection Breaker
2. To swap the battery, put the breaker in "O" position. In case
there is 2 nd (or next) battery bank connected, the DC voltage from
the UPS Bat.+/- will flow through without any interruption to the 2
Battery Bank.
DC connector for the battery tower (or next battery tower)
connection.
To connect the ground terminal, please remove the
covers.
1
3
T 20A 80-009-120 BT-NB-UL
1
2
3
(page 5)
nd