Advertisement
Quick Links
Advertisement
Summary of Contents for Rado NATO EASY CLIP
- Page 1 MASTER OF MATERIALS NATO STRAP EASY CLIP SYSTEM - A ‘HOW TO’ GUIDE...
- Page 2 REMOVING THE NATO STRAP...
- Page 3 STEP 1 Place the watch face down on a protected surface.
- Page 4 STEP 2 REMOVING THE STRAP Push in and simultaneously lift up the spring bar. Remove the nato strap.
- Page 5 ADDING THE NATO STRAP...
- Page 6 12 o’clock 6 o’clock STEP 3 ADDING A NEW STRAP Place the watch face down on a protected surface. Position the nato strap with the clasp at 12 o’clock. The anchor should be in the center of the watch. Insert the spring bar into the holes.
- Page 7 STEP 4 Slide the strap through the loop and pull into place. Adjust the strap to ensure that the watch head is in the middle.
- Page 8 STEP 5 Check that the nato strap is firmly attached.
- Page 9 HOW TO ADJUST THE NATO STRAP ACCORDING TO YOUR WRIST SIZE...
- Page 10 wrong ADJUSTMENT FOR SMALLER WRISTS Remove the watch case from the strap. Use a tool to carefully remove the spring bar which holds the loop in place, see image A. Remove the loop and reattach the spring bar. Slide the loop back onto the strap and into the position shown, see image B.
- Page 11 RESULT A WATCH STRAP ADJUSTED FOR SMALLER WRISTS...
- Page 12 wrong ADJUSTMENT FOR LARGER WRISTS Use a tool to carefully remove the spring bar which holds the loop in place, see image A. Reposition the loop and reattach the spring bar, see image B.
- Page 13 RESULT A WATCH STRAP ADJUSTED FOR LARGER WRISTS...
- Page 14 If you would prefer a watchmaker to change the straps for you, please take your watch to your nearest Rado Boutique. MASTER OF MATERIALS...