Advertisement
30-pin Bluetooth Audio Receiver
Pairing an iPhone, smartphone, tablet or computer with the receiver:
Please make sure the device supports A2DP profile. The pairing procedure will vary depending
on the actual device. Please refer to the user guide of your device for detail instruction. The
general pairing procedures are as follows:
1. Connect AIS03F to your 30-pin speaker dock.
2. Activate your device's Bluetooth function and set
your device to search for Bluetooth devices. Select
AIS03F when it is found.
3. If prompted by your device to connect, select "Yes".
4. After connecting successfully, the blue LED will
flash twice every 5 seconds.
Note: Press the "Pair" button if you want to pair to a different device.
Note: Please make sure the audio output is set to Bluetooth / AIS03F
for audio streaming from the device.
Receiver
30-pin Speaker Dock
30-pin
Advertisement
Table of Contents
Related Manuals for Aluratek AIS03F
Summary of Contents for Aluratek AIS03F
- Page 1 5 seconds. Note: Press the “Pair” button if you want to pair to a different device. Note: Please make sure the audio output is set to Bluetooth / AIS03F 30-pin Speaker Dock for audio streaming from the device.
- Page 2 If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device by calling toll free 1-866-580-1978 or email: support@aluratek.com. Aluratek warrants this product against defect in material or workmanship for 1 Year from the date of purchase. - For more information, please visit: http://aluratek.com/warranty-return-policy...
Need help?
Do you have a question about the AIS03F and is the answer not in the manual?
Questions and answers