Summary of Contents for INNO Instrument V20
- Page 1 V 20 Fiber Microscope Please read this manual before operating the device. Please keep this manual together with the device. 2017/11 Rev.1.4...
- Page 2 User Manual...
- Page 3 Important: INNO Instrument strongly recommends all users to read this manual before operating the V20. This manual is valid for the following software version:...
-
Page 4: Table Of Contents
Contents Fiber microscope Importance of a cleaning the connector end interface Operation Patchcord Tip Adapters Convenient test with PC software Test report Specifications Maintenance and technical support... -
Page 5: Fiber Microscope
Fiber microscope Handheld fiber microscope enables fiber face inspection Available in 200(μm) x or 360(μm) x magnification With this tool, the process of fiber testing can be simplified and performed quickly. Accurate test results can be generated to demonstrate successful pass. Test report •... -
Page 6: Importance Of A Cleaning The Connector End Interface
Importance of a cleaning the connector end interface It is essential to utilize auto-analysis software to test the connector and assess its quality during the commissioning and installation of the fiber. It is important to save the verification records of the connector for future reference. The end-to-end verification can be achieved by combining the connector test with the fiber verification. -
Page 7: Operation
Rotary knob for adjusting focus: It is used for focusing to make the image clear. In order to enable the fuction of V20, you just need to connect the V20 with the fiber connector to the instrument or to the PC which is able to communicate with upper computer. -
Page 8: Patchcord Tip Adapters
Patchcord Tip Adapters 2.5mm / APC 2.5mm / UPC Universal patchcord tip Universal patchcord for 2.5 mm ferrules(APC) tip for 2.5 mm ferrules(UPC) 1.25mm / APC 1.25mm / UPC Universal patchcord tip Universal patchcord tip for 1.25 mm ferrules(APC) for 1.25 mm ferrules(UPC) -
Page 9: Convenient Test With Pc Software
Convenient test with PC software The result of INNO software can be analyzed through the following step: connecting the optical fiber to the device, adjusting the sharpness and then tapping “screenshot”. Meanwhile, the data can be analyzed in detail. The corresponding test task can be marked under the identification function. -
Page 10: Test Report
Test report... -
Page 11: Specifications
Specifications Parameters Size 150 x 35 x 34mm Weight 168g Resolution 3.2μm Image sensor 640 x 480 (VGA) Visual test < 5μm 200μm*200μm of high magnification View angle 360μm*360μm of low magnification Light source Blue LED Digital zoom 3 grades Connector USB 2.0 Operating temperature... -
Page 12: Maintenance And Technical Support
Maintenance and technical support Any operation, such as alignment, maintenance or repair of the device, can only be performed by qualified maintenance personnel. Please contact the engineers INNO Instrument. You can also consult any queries through the following website. www.innoinstrument.com Tel: +82-32-837-5600 Fax: +82-32-837-5601 Email: inquiry@innoinstrument.com... - Page 13 Please visit us on Facebook www.facebook.com/innoinstrument Copyright 2017 INNO Instrument Inc. All rights reserved. ⓒ E-22F, 30, Songdomirae-ro, Yeonsu-gu, Incheon 21990, Republic of Korea 82-32-837-5600 82-32-837-5601 Printed in Korea...
Need help?
Do you have a question about the V20 and is the answer not in the manual?
Questions and answers