Installation des poignées
Désassemblez les poignées (S4) à l'aide d'un tournevis.
Il est important de mettre les bandes et les rondelles de
nylon de chaque côté de la porte pour protéger le verre et
pour conserver l'étanchéité.
Assemblez les deux parties des poignées en vissant la poi-
gnée intérieure (ill. 23 et 24).
Installez les cache-vis (S15) (ill. 25).
Installation of the handle
Take the handles (S4) apart with a screwdriver.
It is important to put the nylon strips and washers on each
side of the door to protect the glass and to make sure it will
be watertight.
Assemble the two parts of the handle by screwing the inside
handle (ill. 23 and 24).
Plug the screw caps (S15) (ill. 25).
Illustration 23
Illustration 24
Illustration 25
15