Berker 177 09 Operation And Assembly Instructions

radio bus
Radio signal amplifier surface-mounted
Radio signal amplifier surface-mounted
Order-No. : 177 09
Operation- and
Assembly Instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
The radio communication takes place via a non-exclusively available transmission path,
and is therefore not suitable for safety-related applications, such as emergency stop and
emergency call.
Do not shorten, extend or strip the antenna. Device can be damaged.
These instructions are an integral part of the product, and must remain with the end
customer.

2 Device components

(1) Repeater
(2) LED, red
(3) LED, green
(4) Housing lid
(5) Screws

3 Function

System information
By statute, the transmitting power, the reception characteristics and the antenna cannot be
changed.
The device may be operated in all EU and EFTA countries.
The declaration of conformity can be viewed on our website.
The range of a radio system from the transmitter to the receiver depends on various
circumstances.
82530511
97-09506-000
Figure 1
Seite 1/5
22.05.2012