Subscribe to Our Youtube Channel
Summary of Contents for PortSIP WebRTC
-
Page 1: Portsip ® Webrtc Gateway User Guide
SOLUTION GUIDE Wave 3 | April 2016 | 2998-0068-002 Rev B ® PortSIP WebRTC Gateway User Guide PortSIP Solutions, Inc... - Page 2 Information is provided “as is” without warranty of any kind and is subject to change without notice. The entire risk arising out of its use remains with the recipient. In no event shall PortSIP and/or its respective...
-
Page 3: Table Of Contents
4.1 Configuring WebRTC Gateway by Wizard ................. 5 4.2 Settings ............................6 Run WebRTC Web Client ..................8 Deployment Practices ..................10 6.1 Deploy WebRTC Gateway with official certificate ..............10 6.2 Deploy WebRTC Gateway with Self-signed certificate in LAN ..........11 PortSIP Solutions, Inc... -
Page 4: The Webrtc Gateway Architecture
Since the traditional operator network (PSTN/VoIP Provider/SIP Trunking) and SIP devices (IP Phone, Softphone) don’t support the newest WebRTC standards such as TURN, DTLS-RTP, RTC-FB, ICE, therefor we need the WebRTC Gateway to transform the signaling and RTP streams. That’s why the Gateway is works like a bridge. -
Page 5: Install Webrtc Gateway
1. Click the Next button. 2. Gateway IP Address: you can specify the WebRTC Gateway IP address here, if the gateway is run in Lan please enter local private IP address; If run on the internet please enter the static public IP. -
Page 6: Settings
5. SIP Transport: your SIP server transport, usually is UDP. 6. Server Port: your SIP server port. Click the Save button to complete the wizard. Note: after you clicked the Save button, the WebRTC Gateway will restart, you have to sign in the management console again. 4.2 Settings 4.2.1 Log... - Page 7 4.2.2 STUN Server If you deploy the WebRTC Gateway in LAN and can’t access the default STUN server, you can try install a STUN Server. Download the STUN Server then extract stunserver.zip and run stunserver.exe. Click the “Settings” in the WebRTC Gateway Management Console and set the stun server IP as the Run stunerver PC IP, the port default is 3478.
-
Page 8: Run Webrtc Web Client
5. Run WebRTC Web Client Assume we have a SIP Server/PBX which SIP domain is portsip.net, it has SIP user 100. Assume we installed the WebRTC Gateway on a server which IP is 192.168.0.28. The WebRTC Gateway setting is: HTTP port: 9288... - Page 9 3. SIP password filed: enter the password of SIP user 100. 4. SIP Domain in case is: portsip.net. 5. WS URI: in case is wss://192.168.0.28:10443 (It is WebRTC Gateway IP and WSS port). 6. Press “enter” button Once the web client registered, you can make & receive calls with other SIP client.
-
Page 10: Deployment Practices
15. Select the SIP Transport as UDP. 16. The Server port is: 5060. 17. Click the “Save” button, the WebRTC Gateway will be restart automatically, you will need to sign in management console again. 18. Open https://examplertc.com:9287/portgo/index.html by last version FiregFox or Google Chrome. -
Page 11: Deploy Webrtc Gateway With Self-Signed Certificate In Lan
8. Select the SIP Transport as UDP. 9. The Server port is: 5060. 10. Click the “Save” button, the WebRTC Gateway will be restart automatically, you will need to sign in management console again. 11. If in LAN the WebRTC Gateway can’t access the internet, Download the... - Page 12 17. SIP password filed: enter the password of SIP user 100. 18. SIP Domain in case is: sip.testsip.com. 19. WS URI: in case is wss://192.168.0.28:10443 (It is WebRTC Gateway IP and WSS port). 20. Press “enter” button 21. Once the web client registered, you can make & receive calls with other SIP client.
Need help?
Do you have a question about the WebRTC and is the answer not in the manual?
Questions and answers