Advertisement
Available languages
Available languages
Introduction
This Leitz product is intended to be used as lighting. The product should only be used in household or
similar environments, such as in offices and shops. The product should not be used in locations with the
presence of a corrosive or explosive atmosphere or for medical purposes. The product may only be
used according to the instructions as described in this manual. All use other than described in this
manual is seen as unintended use. In course of technological progress modifications reserved.
Technical specifications
Energy efficiency rating
For your safety
WARNING! Read all safety warnings
and all instructions.
Please take the time and read the general safety
instructions. You can find the general safety
instructions in a separate booklet. This booklet is
included.
Unpack and check the contents
A
Leitz Style Smart LED Desk lamp
B + C
Removable plugs
D
Adapter body
E
Hex key
F
General safety instructions and
Instructions for use
Installation
• Place the Leitz Style Smart LED Desk lamp
on a stable, flat and horizontal surface.
• Select the removable plug (
your mains.
• Push the plug (
body
.
• Press the 5V adapter plug into the Leitz Style
Smart LED Desk lamp power connection
• Connect to the mains.
• For comfortable adjustment the Leitz Style
Smart LED Desk lamp is equipped with a
weight compensation system for both arms.
Long-term it might be necessary to
compensate wear in the joints by tightening
the hex screw
. For this purpose a
hex key
is included.
E
or
) that fits
or
) into the adapter
Use
• Tap the ON/OFF button
(or off).
• Use the brightness buttons
brightness.
- Tap to change the brightness10% for each
step.
- Press long to continuously change the
brightness up to maximum/minimum.
• Tap the reading button
reading Ambience setting.
• Tap the relaxing button
relaxing Ambience setting.
• Use the USB port at the back to charge a
mobile device
Tip: Enhance the functionality of your Leitz Style
Smart LED Desk lamp with the free App.
With this App you can control the Leitz Style
Smart LED Desk lamp wireless with your mobile
device, set your own ambience, activate
Auto-Brightness and more.
To use the App, do the following:
• Download and install the App on your mobile
device.
• Switch on your Bluetooth and open the App.
• Check the App manual. The App manual can
be found at: www.leitz.com.
.
Maintenance
The LED lamps cannot be changed in the
luminaire.
R&TTE compliance
Hereby, Esselte Leitz GmbH & Co KG declares
that the radio equipment type Bluetooth device is
in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is
available at the following internet address:
www.leitz.com.
EN
to turn the light on
to adjust the
to activate the
to activate the
.
1
Advertisement
