Operation Manual About this Manual 1 .1 Intended Use The Helmer DT1 solar-powered digital thermometer has been designed for use with the Helmer QuickThaw™ Plasma Thawing System. 1 .2 Symbols Found in this Document The following symbols are used in this manual to emphasize certain details for the user: Task Indicates procedures which need to be followed.
Using the Digital Thermometer The stainless steel probe on the DT1 immerses in the water in the chamber, and the display shows the temperature in increments of 0.1 °C. For the display to work, there must be enough light in the work area (at least 35 Lux).
Helmer Scientific Digital Thermometer Operation Manual Maintenance 4 .1 Cleaning the Digital Thermometer Notes • Follow all chemical handling and disposal requirements and procedures specified by your organization. • Use specific cleansers and cleaning supplies specified by your organization. Clean and disinfect the digital thermometer regularly as necessary.
Helmer Scientific Digital Thermometer Operation Manual References and Compliance 7 .1 Safety Compliance This device complies with the requirements of the RoHS Directive 2002/95/CE. This product is certified to applicable UL and CSA standards by a NRTL. 7 .2 Environmental Compliance This device falls under the scope of Directive 2102/19/EU Waste Electrical and Electronic Equipment (WEEE) .
Operation Manual Warranty USA and Canada: The Helmer DT1 is warranted for one (1) year for materials and labor at our factory. Contact Helmer for details. Outside of USA and Canada: Contact your local distributor for warranty information. END OF MANUAL...
Page 9
Helmer Scientific Digital Thermometer Operation Manual 360012-1/I...
Need help?
Do you have a question about the DT1 and is the answer not in the manual?
Questions and answers