1. Manuals
  2. Brands
  3. Ampetronic Manuals
  4. Control Unit
  5. ATT-U
  6. Handbook

Ampetronic ATT-U Handbook

Universal attenuator
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

Universal Attenuator
Handbook contents:

Safety

•

Introduction

•
•
•
•
•
•
Safety:
This symbol is used to alert the
user to important operating or
maintenance instructions.
1. It is important to read these instructions, and to follow them.
2. Keep this instruction manual in an accessible place.
3. No user serviceable parts. Refer all servicing to qualified personnel.
4. No objects filled with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not expose to dripping or splashing.
5. Clean only with a dry cloth.
Introduction
The Universal Attenuator is designed to interface a 100V line or low impedance
(low Z) speaker system to various inputs such as those found on Ampetronic
equipment. In addition to transformer isolation a range of attenuations are
possible by connecting to the appropriate output terminals.
Two terminals are provided at each of the inputs to allow the input cable to 'loop
through' the unit, so no separate junction box is needed.
ATT-U
Box Contents:
1 x ATT-U
1 x Handbook (this document)
Either:
1 x 3.5mm jack cable
1 x 6.3mm jack cable
Or:
1 x XLR cable
The Lightning bolt triangle is
used to alert the user to the
risk of electric shock.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ATT-U and is the answer not in the manual?

Questions and answers

Related Manuals for Ampetronic ATT-U

Summary of Contents for Ampetronic ATT-U

  • Page 1 Introduction The Universal Attenuator is designed to interface a 100V line or low impedance (low Z) speaker system to various inputs such as those found on Ampetronic equipment. In addition to transformer isolation a range of attenuations are possible by connecting to the appropriate output terminals.
  • Page 2 Installation Remove the four screws securing the lid. • Select the desired output cable from those provided. If using the 3.5mm • jack cable connect the braid to the 0V terminal and the other to the appropriate output terminal. If using the 3 pole 6.35mm jack or XLR cable connect the blue cable to 0V and red to the appropriate output terminal (see ‘Connection’).
  • Page 3 Connection...
  • Page 4 NOTE: If not using supplied cables output lead must be less than 1m. Warranty information This product carries a five year parts and labour warranty from date of shipment from Ampetronic. To qualify for the five year warranty, the product must be registered at www.ampetronic.co (products/warranty), without which the warranty will be valid for two years only.

Table of Contents