Summary of Contents for Edsyn FX225
- Page 1 FX225 FUME EXTRACTION UNIT T A B L E O F C O N T E N T S SETTING UP OPERATING INSTRUCTIONS FILTER REPLACEMENT SYSTEM SPECIFICATION...
- Page 2 SETTING UP 1. Detach the FX225 from its packaging. 2. Lift off the filter lid and place gently on the ground. 3. With the filter package exposed remove all protective packaging. 4. Make sure all filters are centered then carefully replace lid.
- Page 3 OPERATING INSTRUCTIONS 1. Push fit the 50mm flexi arms onto the connection on top of the unit. 2. The FX225 is capable of extracting the fume from 2 x 50mm Articulated or Stay Put Arms. 3. The Unit is designed for continuous running, the suction performance will deteriorate as the filters become bocked.
- Page 4 TO REPLACE FILTERS Filter Access. 1. Unplug FX225 from main power supply. 2. Lift off Filter lid clear of the filter package and place on a safe surface. 3. Lift out the pre-filter pad which is recessed into the combined filter enclosure.
- Page 5 SYSTEM SPECIFICATION FX225 Air Flow 120 cfm with filters installed Size Height: 13" Depth: 7" Width: 7" Weight: 4.4-lbs. Power Unit: Type: Radial Ventilator Rated: Output 135W Voltage 110/115V 60HZ Single Phase Current 3.15A Start up current 7 x rated current.
Need help?
Do you have a question about the FX225 and is the answer not in the manual?
Questions and answers