Advertisement
IMPORTANT NOTES: Never stare at or expose skin to UV light. It can damage eyesight and burn skin.
• UV Clari er will not light when removed from the quartz sleeve. The built-in safety switch disables power when not assembled.
• Do not defeat the safety features by bypassing the built in safety switch.
• If a second UV port is available a second UV unit can be installed. Check model compatibility.
• Save the plain UV port cap. It is needed to close o UV port when UV is Clari er is removed. For example, during
• Ballast is enclosed in a double insulated case. Never cut power cord. Do not modify the plug provided with the appliance; if it will
not t the outlet, have a proper outlet installed by a quali ed electrician.
UV MAINTENANCE
1) E ective useful bulb life is one season. The bulb will continue to illuminate long after the UV radiance has dimin-
ished. For best results replace bulb annually.
2) Periodically clean the quartz sleeve. Always allow unit to cool before disassembly. Carefully disassemble and clean
outside using a solution of 30% white vinegar to water. Allow to soak to soften scale or build-up. Use a bottle brush
and mild detergent to clean inside of quartz sleeve. Make certain inside of tube is dry before reassembly. Lubricate
Gasket and O-rings with
O-RINGS.
Note that if Quartz sleeve or UV lamp shows any signs of cracks or ssures it cannot be used and must be replaced.
WINTERIZING
The UV Clari er must be removed during harsh winters. To remove UV Clari er, rotate the lock ring counter clockwise.
Pull the socket cap/light unit assembly straight up, being careful not to break the UV lamp. Disconnect lamp from
socket by grasping the plastic base of the lamp and carefully pulling it straight apart from the socket cap. Remove the
quartz sleeve from the lter cover by pulling straight upwards. Pack the quartz sleeve and UV lamp carefully and store
it with the O-ring and socket cap/ ballast for winter. Cover the open UV port with the clear extra UV port cap that was
placed in storage. DO NOT ALLOW WATER TO GET INTO UV QUARTZ SLEEVE AND FREEZE. IT WILL CRACK WHEN WATER
FREEZES.
REPLACEMENT PARTS
Wattage 120 Volt Quartz
Lamp Sleeve
ITEM # ITEM#
9
15615
15812
18
15628
15822
WARRANTY: Pondmaster Filtration systems are warranted against failure due to defects in materials and/or workmanship for one
year from date of purchase. This warranty covers defects occurring under normal use and applies to the original purchaser at retail
and may not be transferred. The warranty and remedies set forth herein are conditional upon proper installation, use, maintenance,
storage, and conformance with the applicable use. It will be based upon Danner Mfg. discretion as to whether the defects are of
manufacturing origin. Any damages due to improper installation are not covered by this warranty. This warranty does not apply to
appearance or accessory items. This warranty does not include damage due to handling, transportation, unpacking, setup, installa-
tion, repair or replacement of parts supplied by any other than Danner Mfg.; improper maintenance, modi cation or repairs by the
purchaser; abuse, misuse, neglect, accident, re, ood, or other acts of God. Any oral statements about this product made by the
seller, the manufacturer, their representatives or any other parties do not constitute warranties and shall not be relied upon by the
user and are not part of this contract. Neither the seller nor the manufacturer shall be liable for any injury, loss or damages, direct,
incidental, or consequential, including but not limited to incidental or consequential damage for lost pro ts, lost sales, injury, and
inability to use the product and the user agrees that no other remedy is available. Before using, the user shall determine the suitability
of the product for their intended use and the user shall assume all risk liability whatsoever in connection therewith. To validate this
warranty, keep your proof of purchase (copy of sales receipt from a certi ed Pondmaster dealer). Warranty covers the repair or
prorated replacement of the Danner Mfg. products. Danner Mfg. denies all liability for any other loss including but not limited to loss
of equipment, income, livestock, or personal injury.
THE FOLLOWING VOIDS WARRANTY:
PRODUCT LABELS ARE DEFACED OR REMOVED. PRODUCT IS IMPROPERLY INSTALLED OR MAINTAINED BY USER OR THEIR AGENT.
PRODUCT IS ABUSED, MISUSED, OR DAMAGED BY USER OR THEIR AGENT. PRODUCT IS NOT WINTERIZED OR REMOVED FROM
SERVICE AND DRIED DURING FREEZING CONDITIONS.
!
DANGER: ULTRAVIOLET RADIATION
to a circuit that is protected by a ground-fault circuit-interrupter (GFCI). DO NOT OPERATE UNTIL
UV
FULLY ASSEMBLED INTO PRESSURE FILTER.
WARNING:
Risk of Electric Shock. Disconnect power before servicing. Do not immerse in water. For household use only.
DANNER MFG., INC.
Silicone grease
before reassembling. NEVER USE PETROLEUM BASED LUBRICANTS ON
9 Watt
15615
. Disconnect Power Before Replacing Lamp. Connect only
Islandia, New York 11749-1489
18 Watt
15812
Phone - 631 234-5261
Visit our website at www.Dannermfg.com
15628
MERCURY WARNING: LAMP CONTAINS
MERCURY, MANAGE IN ACCORDANCE
WITH DISPOSAL LAWS.
WWW.LAMPRECYCLE.ORG
15822
Advertisement
