Page 2
Confetti cut size: 5 x 35mm , as misuse may cause injury to the users and damage the machine. table or floor. 2. Align the shredder header limited switch to the waste basket back side, the front side has a transparent window.
Page 3
and the machine will be in standby mode. Put the paper to be shredded the machine will start shredding automatically and return to standby mode after shredding. 2. When jamming is caused by inserting too much paper, or if you want to withdraw the paper immediately when shredding, set the slide switch to "REV".
Page 4
TROUBLESHOOTING the shredder does not return to standby keep the exit. mode. are clamping onto Shredder does not work Scrapped paper is blocking after withdrawing paper. the automatic sensor. Adjust the angle of the Paper is fed into the entry, Paper is not touching the paper fed into the shredder automatic sensor.
Page 5
12 Month Warranty Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided.
Need help?
Do you have a question about the 42735915 and is the answer not in the manual?
Questions and answers