Summary of Contents for Rosenhill CALIFORNIA REDWOOD WINERACK
- Page 1 Click Here for Rosehill's Home Page CALIFORNIA REDWOOD WINERACK DISPLAY TOP ASSEMBLY & INSTALLATION GUIDE...
- Page 2 Click Here for Rosehill's Home Page TOOLS AND HARDWARE Philips Screwdriver Hammer Drill Bracket x 2 Nails x 10 1/2” Screw x 4 STEP 1 INSTALL BRACKETS Position brackets on TOP REAR horizontal bar, about 8” from each end. Note how tab aligns bracket ush to rear edge of bar. Pre - drill 1/16”...
- Page 3 Click Here for Rosehill's Home Page STEP 2 PLACE DISPLAY Place display on TOP of rack. Align brackets with TOP REAR upper edge of display. OF THE RACK Pre - drill, then fasten brackets to display with 1/2” at head screws. LIP FACING OUT STEP 3 NAIL...
- Page 4 Click Here for Rosehill's Home Page TEST BEFORE USE Use of WINERACK is strictly at your own risk. Drobot Inc. will not accept any responsibility or liability for damages resulting from units not assem- bled precisely as directed, or not securely fastened to a wall or support with suitable fasteners.
Need help?
Do you have a question about the CALIFORNIA REDWOOD WINERACK and is the answer not in the manual?
Questions and answers