Advertisement
Quick Links
Advertisement
Summary of Contents for Nipsti Helper tower
- Page 1 Assembly and user manual of a helper tower...
- Page 2 Please keep this manual for further use IMPORTANT INFORMATION: Please read this manual carefully before assembling and starting to use the helper tower (hereinafter also: the product). In case you have any questions, please contact the producer OÜ Ning for further instructions: nipstikids@gmail.com; facebook: https://www.facebook.-...
- Page 3 3. Connect details 1, 2 and 3 with the wooden dowels on detail 4: Image 4 The laminate on our most exsclusive helper tower details is different on both sides. The purpose for that is to provide extra security for little ones. The surface with structured laminate is less slippery.
- Page 4 4. Connect the other detail 4 with details 1, 2 and 3: Image 5 Upon attaching the screws to the details tighten the screws carefully and observ that upon tightening you do not damage the laminate. 5. Fasten the screws (2 to each side). Do not fasten the screws on detail 3: Image 6 6.
- Page 5 7. Connect the other detail 7: Image 8 8. Fasten the screws (4 on each side): Image 9 9. Connect the two previously assembled parts with each other and fasten the remaining screws to detail 3: Image 10 10. Fasten the screws with the handle, see images 2 and 3. READY!
- Page 6 The helper tower is suitable for use for the child, if the child can stand, sit without a backrest and independently climb up and down the helper tower. The helper tower is too small for the child, if the product is inconvenient for the child to use in the tower-position.
- Page 7 NEVER place the product in the vincinity of dangerous things or appliances (e.g. oven, stowe, fire place). NEVER let the child to climb on the helper tower when it is wet. Upon using of the helper tower by the child ALWAYS check that any liquid on the helper tower is immediately cleaned away. Liquid on the helper tower may cause the child to slip and fall.
- Page 8 Changing the helper tower from the tower-position to desk-position and vice versa is easy: loosen the screws with handles, break the helper tower from the hindge in the middle to the desired posi- tion and fasten the helper tower to the desired position with the screws with the handles on both sides.