TECHNICAL SPECIFICATIONS CHASSIS: • Anti-corrosion coated, blue colour. • Covers, green colour. • 2 wheels with brakes at the rear and 2 at the front for added manoeuvrability. LIFTING SYSTEM ( 5472.00 hydraulic version): • Jack with oil pressure. • Adjustment by leg control.
RANGE OF APPLICATION Consisting of a base on wheels and a stretcher, this stretcher lift allows to transfer patients to a bed, a bathtub etc … The Topaz must be used only by qualified people who have read and understood the user manual. The Topaz is intended to be used only for transfer of patient.
TRANSFERS Before any moving, it is essential to check the good stability of the patient. FROM THE BED : - If possible, position the patient on his side. - Pivot the 2 safety bars behind the stretcher. - Press the mattress with the stretcher. - Lock the 2 back wheels with the brakes located on it.
6) Defects and damages of importance to the safety of the stretcher lift that have occurred between inspections and have already lead to corrective actions should be entered in the logbook. 7) Defects and damages should be reported back to Reval for action. This feedback should be reported in the logbook.
MAINTENANCE It is advisable to clean the stretcher after each patient, if their is a risk of cross infection. Do not use abrasive or solvents goods (scouring cream). Do not use a jet of water. Do not use alcohol products for disinfection. RECHARGING OF BATTERY (ELECTRIC VERSION) The batteries have to be recharged every day.
MODIFICATION OF FIXING POINT OF THE STRETCHER The position of the stretcher on the mast is adjusted at the factory. It can be modified by the technical service of the customer. This work requires the greatest attention. Nobody has to be on the seat. - Protect the mast of the lift with a plastic film.
Need help?
Do you have a question about the TOPAZ 5472.00 and is the answer not in the manual?
Questions and answers