Summary of Contents for LSR TIWI5
- Page 1 Antenna Design Guide Last updated February 11, 2016 The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 1 of 23...
-
Page 2: Table Of Contents
Module Integration Considerations - Top Assembly..............22 Testing Requirements for End-Product ................... 22 SAR Testing Requirements for End-Product ................22 Contacting LS Research ......................23 The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 2 of 23... -
Page 3: Introduction
The purpose of this document is to provide details regarding the design and integration of certified antennas to the TiWi5 module. It covers both a PCB mounted Chip Antenna as well as an externally mounted whip antenna. It will inform the reader as to the required PCB layout details and provide expected performance specifications. -
Page 4: Chip Antenna
It is matched to 50 ohm impedance and is well suited for integration to the LSR TiWi5 radio module. The chip antenna is used external to the TiWi5 module as part of an overall solution for the LSR TiWi5 radio module. -
Page 5: Mechanical Dimensions
Terminal Configuration Table 5 – Chip Antenna Terminal Configuration Typical Radiation Pattern Figure 1 - Chip Antenna Radiation Patterns (5 GHz) The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 5 of 23... -
Page 6: Typical Radiation Patterns
TIWI5 ANTENNA DESIGN GUIDE Typical Radiation Patterns Figure 1 - Chip Antenna Radiation Patterns (2.4 GHz) The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 6 of 23... - Page 7 TIWI5 ANTENNA DESIGN GUIDE Figure 2 - Chip Antenna Radiation Patterns (5 GHz) The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 7 of 23...
-
Page 8: Dipole Antenna
ANTENNA DESIGN GUIDE Dipole Antenna The LSR 001-0009 Dipole Antenna is used in conjunction with the LSR 080-0001 U.FL to Reverse Polarity SMA Cable, and the Hirose PCB mounted U.FL connector, to provide an externally mounted antenna solution for the LSR TiWi5 radio module. -
Page 9: Dipole Antenna Specifications
≤2.0：1, Maximum Frequency 2400-2500MHz, 5150-5850MHz Weight Size 137 × 13 mm Antenna Color Black Table 7 – Dipole Antenna Specifications The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 9 of 23... -
Page 10: Typical Radiation Patterns
TIWI5 ANTENNA DESIGN GUIDE Typical Radiation Patterns Figure 3 – Dipole Antenna Pattern (LSR Antenna @ 2405 MHz) The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 10 of 23... - Page 11 TIWI5 ANTENNA DESIGN GUIDE Figure 4 – Dipole Antenna Pattern (LSR Antenna @ 5250 MHz) The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 11 of 23...
- Page 12 TIWI5 ANTENNA DESIGN GUIDE Figure 5 – Dipole Antenna Pattern (LSR Antenna @ 5750 MHz) The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 12 of 23...
-
Page 13: Mechanical Dimensions
TIWI5 ANTENNA DESIGN GUIDE Mechanical Dimensions Figure 6 – Dipole Antenna Dimensions The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 13 of 23... -
Page 14: Pcb Layout Requirements
1. LS Research 001-0009 center-fed dipole antenna and 080-0001 U.FL to Reverse Polarity SMA connector cable. Johnson 2450AD46A5400 2.4/5.4 GHz Ceramic Chip Antenna. The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 14 of 23... -
Page 15: Chip Antenna Reference Design Pcb
TIWI5 ANTENNA DESIGN GUIDE Chip Antenna Reference Design PCB Figure 7 – Chip Antenna Certified Reference Design PCB The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 15 of 23... -
Page 16: Chip Antenna Reference Design Schematic
TIWI5 ANTENNA DESIGN GUIDE Chip Antenna Reference Design Schematic Figure 8 – Chip Antenna Certified Reference Design Schematic The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 16 of 23... -
Page 17: Chip Antenna Matching Components
±0.1pF 0201 SMT CERAMIC CAPACITOR 25V NPO C2, C6 6.8pF Johanson 250R05L6R8CV4T ±0.25pF Table 8 – Chip Antenna Matching Components The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 17 of 23... -
Page 18: Dipole Antenna Pcb Layout Requirements
TIWI5 ANTENNA DESIGN GUIDE Dipole Antenna PCB Layout Requirements Figure 10 – Dipole Antenna PCB Layout Requirements The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 18 of 23... -
Page 19: Dipole Antenna Reference Design Pcb
TIWI5 ANTENNA DESIGN GUIDE Dipole Antenna Reference Design PCB Figure 11 – Dipole Antenna Certified Reference Design PCB The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 19 of 23... -
Page 20: Dipole Antenna Reference Design Schematic
TIWI5 ANTENNA DESIGN GUIDE Dipole Antenna Reference Design Schematic Figure 12 – Dipole Antenna Certified Reference Design Schematic The information in this document is subject to change without notice. 330-0093-R1.3 Copyright © 2012-2016 LSR Page 20 of 23... -
Page 21: Emc Compliance
SAR requirements. The TiWi5 module was not certified as a DFS Master, and therefore the AP mode is not allowed in the 5 GHz bands. The AP mode is allowed to be used in the 2.4 GHz band. Software cannot prevent the usage of the AP mode in the 5 GHz band, so it is the module-integrators responsibility to ensure the 5 GHz AP mode is not used. -
Page 22: Module Integration Considerations - Substitute Antenna Systems
FCC or IC. SAR Testing Requirements for End-Product Since the TiWi5 radio module was certified in a mobile configuration, the end-product does not require SAR testing if the end-product is not used within 20cm of the human body, nor used in conjunction with another radio transmitter. -
Page 23: Contacting Ls Research
No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of LSR products. EXCEPT AS SET FORTH IN LSR’S TERMS AND CONDITIONS OF SALE LOCATED ON LSR’S WEB SITE, LSR ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. - Page 24 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: LS Research 001-0009...
Need help?
Do you have a question about the TIWI5 and is the answer not in the manual?
Questions and answers