Table of Contents
Advertisement
Quick Links
User Manual
※※※※PROMPT※※※※
Application caution of equipment:
1, Installation and debugging of the EDFA should be done only by qualified or experienced
technician;
2, Do not turn on the device before it connects to the system,or without rubber cover,in
case of the connectors being burnt out;
3, Do not look directly into optical output port with naked eyes while the EDFA is operating;
4, EDFA with output power ≥21dBm per port is made with factory setting"safe pluggable
mode" status "ON" with default output power 19dBm in order to protect the connectors
from burning out by misoperation.Please turn off this function After the optical output
connection is completed, the power will return to the output specification or set.
Advertisement
Table of Contents
Summary of Contents for ALEA FWAP-1550H series
- Page 1 User Manual ※※※※PROMPT※※※※ Application caution of equipment: 1, Installation and debugging of the EDFA should be done only by qualified or experienced technician; 2, Do not turn on the device before it connects to the system,or without rubber cover,in case of the connectors being burnt out; 3, Do not look directly into optical output port with naked eyes while the EDFA is operating;...
- Page 2 User Manual User Manual FWAP-1550H 32X22 PON & CATV WDM EDFA...
-
Page 3: Table Of Contents
User Manual Catalog 1．Production Description........................ - 1 - 2. Equipment structure........................- 2 - 3.MAIN technical index........................- 3 - 4.Operation Instruction........................- 4 - 5. STATUS ALARM DESCRIPTION....................- 6 - 6. Application of network........................- 7 - 7.Optical connection attention......................- 8 - 8. -
Page 4: 1．Production Description
1．PRODUCTION DESCRIPTION 1.1 Introduction FWAP-1550H series EYDFA optical amplifier combiner is the latest equipment of optical transmitting system for PON+CATV FTTH/FTTP. It realizes the combination function of OLT PON and CATV 1550nm after optical signal is amplified. In detail, there is one way CATV input plus 16/32/64 routes PON signal in and the 16/32/64 routes which have 1490+1310+1550nm combined output 1550nm with 30 to 45dBm total power. -
Page 5: Equipment Structure
User Manual hot-plugging supported, automatic temperature control case heat dissipation with dual power cold&hot backup. 1.2.3 Intuitive: Microprocessor monitors operating status of pump laser which is the most valuable part of the equipment, operating parameters show on LCD display. 1.2.4 Network Management: Optional type status monitoring transponder certainly satisfy national, SCTE, HMS, WEB standard, it realizes network management monitoring function. -
Page 6: Main Technical Index
User Manual 2.2 Integrated PON+CATV WDM EDFA Block Diagram W D 1543 W D 1543 P O N 3.MAIN TECHNICAL INDEX Items Unit Performance Index Optical Operating Wavelength 1535～1565 Input Optical Power Range -3～+10 Nominal Input Optical Power Maximum Alarm Value ≥+10 front panel display alarm，... -
Page 7: Operation Instruction
User Manual ≥48(comment 1) C/CTB ≥63(comment 1) C/CSO ≥63(comment 1) Power Supply/Consumption AC165～265 or DC-48/20(hot-plugging single power) Operating/Storage -20～50/-30～70 ℃ Temperature Operating/Storage Humidity 5～90 Case Size 88×482.6×387 Network Management RJ45(following national network management Connector standard, supports WEB) PON Wavelength 1310/1490 PON Linker SC/UPC Optical... - Page 8 User Manual nominal output power, laser 2(17-32 channels) nominal output power, product serial number, control software version number and software version compilation date. Figure 1 Figure 2 Figure 4 Figure 3 Figure6 Figure 5 4.2 The first item under the main menu is the parameter query (see figure screen 7). The contents of the project are: real-time parameters of output power 1 and 2, power supply 1 and 2, working state of fan.
-
Page 9: Status Alarm Description
User Manual Figure 8 Figure 7 Figure 9 Figure 10 Figure 11 5. STATUS ALARM DESCRIPTION 5.1 The machine is in the upper right position of the front panel with STATUS working status indication (LED). The green light indicates that the operation is normal, the red light indicates that the laser is not in operation, the red light flashes to indicate the alarm (there are related parameters that do not conform to the set value), and is accompanied by a "beep"... -
Page 10: Application Of Network
User Manual delay function. When the laser is turned on, it takes 10 seconds to delay the laser to enter the operation. 6. APPLICATION OF NETWORK This machine has network management function, set up IP 、 gateway, subnet mask, server address according to the above operation steps, just connect the RJ45 interface signal to the local area network (Ethernet), then connect with the main server from any network port in the local area network, install the standard HFC network equipment management system application software... -
Page 11: Optical Connection Attention
User Manual 7.OPTICAL CONNECTION ATTENTION Before connection, clean all optical connectors carefully and read cleaning guide: 7.1 Optical Fiber Patch Cord 7.1.1 Taking off dust cap of fiber connector and making sure optical connector is APC interface; 7.1.2 Using a specified dry wiping cloth without wool(5Kimwipes®) ; better to use specified microscope (100 and 200 times) to check the clean level of optical connector or imperfection statue;... -
Page 12: Guarantee And Maintenance Matters
User Manual 8.1 The machine should have a good grounding, grounding resistance should be <4Ω. According to international standards, 220V use three-wire system into the line, middle line is the grounding wire. 8.2 This machine uses imported high-performance, highly reliable switching power supply with constant voltage over-current protection, which already have imported fuse can be 165V ~ 260V voltage range of the city within the network work properly.
Need help?
Do you have a question about the FWAP-1550H series and is the answer not in the manual?
Questions and answers