Advertisement
CAUTION
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
• Do not use seasonal products outdoors unless
marked suitable for indoor and outdoor use.
When products are used in outdoor applications,
connect the product to a Ground Fault Circuit
Interrupter (GFCI) outlet. If one is not provided,
contact a qualified electrician for proper installation.
• This seasonal use product is not intended for
permanent installation or use.
• When decorating trees use miniature light
bulb strings or LED light strings only. "C"
size bulbs are not recommended.
• Do not mount or place near gas or electric
heaters, fireplaces, candles or other similar
sources of heat.
• Do not secure the wiring of the product with
staples or nails, or place on sharp hooks or nails.
• Unplug the product when leaving the house,
when retiring for the night, or if left unattended.
• CAUTION: This is an electrical product – not a
toy To avoid risk of fire, burns, personal injury
and electric shock, it should not be played with
or placed where small children can reach it.
Assembly Instructions
(Figure 1)
Each carton contains one top section, two middle sections,
one bottom section and a metal tree stand.
1. Unfold the tree stand and partially insert the eye bolt.
Remove packing material from ends of poles. Put bottom
section pole into tree stand making sure it is seated
properly. Tighten the eye bolt.
2. Insert the lower middle tree section into the bottom
section. Optional: You may want to lubricate middle section
pole ends prior to assembly. This will make the sections
easier to separate when disassembling for storage.
Connect the light string cord from the bottom section into
the receptacle in the lower middle section.
Take care not to let the wires get caught in branch hinges
where they may become damaged.
3. Insert the upper middle section into the lower middle section.
Connect the light string cord from the this section into the
receptacle in the lower middle section.
4. Insert the top tree section into the green plastic opening of
the upper middle section. This is the "pole cap" which
keeps tree top section securely in place. Connect the light
string cord from the this section into the receptacle in the
lower middle section.
5. Remove wrap from sections and branches should fall into
place. If any branches remain upright, gently lower them
• Do not let lamps rest on the supply cord or any wire.
• Do not use this product for other than its
intended use.
• Do not hang ornaments or other objects from
cord, wire or light string.
• Do not close doors or windows on the product
or extension cords as this may damage the wire
insulation.
• Never operate this product if the power cord or
plug is damaged.
• Use only manufacturer specified replacement bulbs.
• Read and follow all instructions that are on the
product or provided with the product.
USE AND CARE INSTRUCTIONS
• When storing the product, carefully remove the
product from wherever it is placed, including
trees, branches, or bushes, to avoid any undue
strain or stress on the product conductors,
connections, and wires.
• When not in use, store neatly in a cool, dry
location protected from sunlight.
Fig. 1
into proper position making sure not to place undue pressure on the
brackets. Each branch must be shaped to a natural position by
spreading tips away from center (See Shaping Instructions).
Shaping Instructions
Shaping the tree branches is the last step of assembly. The care and
attention given to this final process will result in a genuinely beautiful
and appealing holiday centerpiece.
1. Every tree style is shipped from the factory with the tips of each
branch compressed to the center (Figure 2).
2. Each branch tip must be shaped to it's proper position to give the
tree a natural look. This is done by gently grasping the left and
right wing tips and spreading them out away from the center tip
(Figure 3).
3. Each individual tip should then be spread out separately. Tips
should then be bent slightly upward to add a more natural looking
appearance. Figure 4 shows a typical tree branch after shaping.
4. As you shape closer to the top, the branches will no longer have
wing tips, but will otherwise shape in the same manner as lower
sections.
Optional: Shaping of the tree top may be easier performed prior to
attachment to middle tree section.
Bulb Replacement
1. Unplug light string from power source.
2. Pull up on the Base Lock™ unlatching the bulb from the bulb
socket. Gently pull the bulb straight out (Figure 5).
3. Before inserting the new bulb into socket, make sure
that the two wires on either side of the the bulb base
are straight up and flush with the base (diagram at right).
4. Carefully insert new bulb into socket and push down
Base Lock until it snaps into place (Figure 6).
Fuse Replacement
1. Unplug light string from power source.
2. Fuses are located in light string plug. Slide the fuse access cover
away from cord side (in direction of arrow, Figure 7) exposing fuses.
3. Remove fuses from compartment and examine. Replace burnt out
fuse with new one.
4. Close fuse compartment by sliding access cover back in towards
cord side of plug (Figure 8).
Storage
Remove all holiday decorations. Gently press tips back into center
branch. Raise all branches to original upright position taking care not
to place undue pressure on the attached ends of the branches. When
disassembling tree, a twisting motion will help to separate the sections
from each other. All tree parts can be replaced in original carton and
should be stored in a cool, dry place.
SAVE THESE INSTRUCTIONS
For indoor use only. Retain carton for storage purposes.
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Advertisement
