Energie MINIMUS SURFACE Installation Instructions

MINIMUS SURFACE
Installation Instructions
1

Install Energie junction box into wall.

4
Anchor coverplate to j-box at one end and
screw to wall at other end.
7

Snap fixture onto mounting plate.

Product to be installed by qualified electrician only.
Energie LLC, 15000 W. 6th Ave., Ste 202A Golden, CO 80401 Tel 720 963 8055 Fax 720 963 8044 www.energielighting.com
All rights reserved. These products may be covered by one or more U.S. or international patents or patents pending. 9/02
2

Unsnap cover from back of light.

5
Anchor mounting plate to coverplate at
both ends by reattaching with provided
nuts.
8
Remove lens or baffle by pulling out and
off.
3
Remove nuts to detach backplate from
coverplate.
6
Make electrical connection and push con-
nection through coverplate and mounting
plate into junction box.
9
Slide lampholder cover inside of lamphold-
er.
PART # 05090205-01
1