Table of Contents
Advertisement
QUANTUM INSTALLATION GUIDE
a)
Slip the vinyl tubing (½" ID) to the rear of the control valve.
b)
Secure with a hose clamp.
c)
Run the drain line to an appropriate drain area.
ATTENTION: Waste connections or drain outlet shall be designed and constructed to provide for connection to the
sanitary waste system through an air-gap of 2 pipe diameters or 1 inch (22 mm) whichever is larger.
Never insert drain line directly into a drain, sewer line, or trap. Always allow an air gap between the drain line and the
wastewater to prevent the possibility of sewage being back-siphoned into the conditioner.
©2020 Quality Water Treatment. All rights reserved.
DRAIN INFORMATION
24
.
Advertisement
Table of Contents
