Table of Contents
Advertisement
For any faults not covered by the Manual, please contact the manufacturer immediately.
Tampering with the unit can result in very hazardous situations. The manufacturer is not liable for any damages caused by
tampering with the unit. The consequences for failing to abide by the Manual shall be borne by the user on its own.
2.1 Meaning of Various Labels
WARNING
A situation that may lead to injury.
NOTE
A situation that may cause damage to the unit or
loss of property.
INFORMATION
Indicates a useful hint or additional information.
2.2 Warning
Ask professional staff to install (install for the first
●
time, change the place of the unit or re-install) and
repair the unit and its parts. The installation operator
must have acquired the relevant professional
qualification. Do not attempt to install or repair the air
conditioner by yourself, as any improper operations
may lead to fire, electric shock, personal injury or
water leakage.
Make sure the unit is grounded reliably in accordance
●
with the laws. Otherwise, it may cause electric shock.
Stop using the air conditioner and consult your
●
dealer in case of any abnormalities. Otherwise, fire or
electric shock may occur.
Do not attempt to maintain or alter the unit by
●
yourself. Improper operations may cause water
leakage, electric shock or fire.
Make sure the leakage protection device is installed,
●
or electric shock may occur.
Do not wash the unit with water, or electric shock may
●
occur.
To avoid electric shock, do not place any water-filled
●
container on the unit.
Do not operate the switch with wet hands, or electric
●
shock may occur.
Do not put your fingers or other objects into the unit, it
●
can result in serious injury.
Do not obstruct the air supply channel, it may result in
●
personal injury or damages to the unit.
Check that the supporting structure of the unit is
●
securely installed after a long period of use, to
prevent fall accidents.
Make sure the installation base and hoisting are
●
robust and reliable; otherwise, the unit may fall and
lead to accidents.
Do not expose yourself to cold air over a long period.
●
Too low temperature may cause harm to your health.
●
Do not expose animals or plants to air outlet to avoid
●
any harm.
This unit is intended for air handling only. Do not use
●
it for animal rearing.
Do not install the unit where flammable gas may leak.
●
Otherwise, fire may occur. Do not install the unit in
potentially explosive atmospheres.
Keep the unit far away from combustible spray to
●
avoid fire.
Use proper fuse. Do not use iron wire or copper
●
wire, as it may cause fire or unit abnormality.
When connecting power supply to the unit, follow
●
the regulations of the local electric company.
Provide separate power switch to ensure the unit
●
can be disconnected from power properly.
Do not use this unit to store spare parts or other
●
items.
Please attach enough importance to the signs and
●
symbols indicated on the unit. Any other potential
hazards not covered in the Manual (if any) should
be specified in labels attached to the unit.
If the supply cord is damaged, it must be replaced
●
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
2.3 Note
Read the Manual carefully and perform a safety
●
inspection in advance so that you can be fully
aware of the possible dangers as you use or install
the unit.
The manufacturer shall not be liable for any
●
personal or animal injury or damage to any object
caused by incorrect installation, adjustment,
maintenance or improper use.
The manufacturer is not held liable for any
●
damages resulting from faulty operations against
this Manual.
Do not expose this unit to wet or humid
●
environments as this may damage electrical
components.
Do not store this unit in the open air. Do not stack
●
unpackaged units.
Do not use this unit to store food, plants, precision
●
instruments, artwork etc.
To operate the unit for the first time, exhaust the
●
air in the coil; otherwise, the performance may be
compromised.
Clean the inside of the water pipe before use.
●
Remember to implement anti-freezing measures
●
for coil in winter. For details, please refer to anti-
freezing instructions herein.
Keep the unit energized even if it is not in service
●
over a long period.
Adopt self-protection measures when you install,
●
maintain or clean the unit.
Do not press the unit. Handle it carefully as any
●
damages may cause unit malfunction.
Reserve enough space for installation and
●
maintenance.
Before installation, check whether the unit is
●
reliably grounded. Otherwise, do not proceed with
the installation. In no circumstances can the earth
line for main power switch be disconnected.
Rotate the fan impeller during installation. Contact
●
the manufacturer if you hear any abnormal noises.
02
Advertisement
Table of Contents
