Chapter 2 Setup; Installation - Lenovo SE-551F Setup Manual

Chapter 2
Setup
This Chapter provides details on how to install and configure Lenovo Smart

Installation

1. Power-Up and Check LED
Turn on the On/Off switch on the rear side of Lenovo Smart Video Doorbell and wait for
20 seconds until the LED turns to slow green blinking.
Note: The internal battery supports about 40 minutes of operation. If you don't see the
camera powering up, please charge Lenovo Smart Video Doorbell via Micro USB cable
with a USB charger (DC5V1A, not provided in the package) for 45 minutes before
installation.
2. Add Lenovo Smart Video Doorbell to your Wireless network.
a. Wireless routers must be compliant with the IEEE802.11n, IEEE802.11b or
IEEE802.11g specifications and must use compatible settings.
3. Switch to analog or digital chime according to your legacy doorbell in the process.
(The default chime which Lenovo Smart Video Doorbell supports is analog type; user
needs to select which type of chime in the app during setup)
If your legacy doorbell produces an electronic sound that is programmable and comes in
the form of a unique sound, it's a digital chime. If it has a traditional "ding dong" sound,
it's an analog chime.
4. Download the app
4.1. Download "Lenovo Camera" app from Google Play Store or Apple App Store and
create an account.
Video Doorbell.
The default Wireless settings are:
SSID: ANY
Wireless Security: None/WPA/WPA2
Domain: USA
Channel No.: Auto
2
5