Table of Contents
Advertisement
Quick Links
Keep this instruction manual in a safe place for future reference
Thank you for purchasing the Espresso 4-slice toaster. Please read through this manual
before connecting and operating this product. Keep this manual for future reference.
Evolution Stand Mixer
instruction manual
1
Shop online – go to
homechoice.co.za
Advertisement
Table of Contents
Summary of Contents for homechoice Evolution HCSM-03M
- Page 1 Shop online – go to homechoice.co.za Evolution Stand Mixer instruction manual Keep this instruction manual in a safe place for future reference Thank you for purchasing the Espresso 4-slice toaster. Please read through this manual before connecting and operating this product. Keep this manual for future reference.
- Page 2 Keep this guarantee If you require any further information, please do not hesitate to call us on 0861 466324. Any complaints regarding goods or services supplied by homechoice should be made to our Customer Care Department. Post: homechoice, Freepost CB0225, Capemail 8089 E-mail: contact@homechoice.co.za...
- Page 3 If you find that something is missing, please do not assemble. Contact our Customer Service on 021 680 8000. Evolution multi-function stand mixer HCSM-03M Product checklist • Evolution multi-function stand mixer • Filler tray • Mixing bowl • Mixing hook, egg whisk and kneading hook •...
- Page 4 Part Names Filling tray Suction foot Filling tube Lever knob Lock ring Speed selector Connector ring Motor housing Splashguard cover Swivel arm Mixing bowl Blender jug Base plate Power switch Lower housing...
- Page 5 Meat grinder assembly Plunger Secondary blade Filling tray Drilled discs x 3 Blade housing Adaptor Silicon ring Lock ring Grinding blade Meat funnel...
-
Page 6: Important Safety Instructions
Important safety instructions When using your stand mixer, basic safety precautions should always be followed: Read all the instructions carefully, and keep them in a safe place. This product has not been designed for any uses other than those specified in this manual. -
Page 7: Important Usage Notes
Do not use chemical additives or abrasive detergents to clean the stand mixer, as they will damage the appliance. This appliance has been designed for use in households and similar environments, including (but not limited to) areas such as staff kitchens in shops and offices, hotel and B&B rooms, farmhouses, etc. - Page 8 Blender jug assembly Measuring cup Sealing ring Blade housing Blender jug Base Safety ring...
-
Page 9: Assembly And Operation
Assembly and operation • Carefully unpack the stand mixer, ensuring that all packaging material is removed. • Place the appliance on a clean, dry, level surface. • Ensure that the speed selector knob is set to the 0 position. Kneading Cover the drive shaft of the mixing drive with the blender safety cover: •... - Page 10 Mixing or kneading dough The recommended ratio for flour to water is 5:3. Ensure that the mixing bowl is no more than 3/4 full. When filling the mixing bowl, also remember not to exceed the 1.5kg maximum weight. When using the kneading blade or mixing blade, turn the speed selector knob to Speed 1 for the first 30 seconds, Speed 2 for another 30 seconds and finally at Speed 3 for another 3 minutes.
-
Page 11: Meat Grinder Assembly
Meat grinder assembly Remove the protective cover. Then place the meat funnel and the blade housing into the motor housing. Place the filler tray on the blade housing, which is then used to mount the tray above the motor housing. Place the grinding blade in the blade housing, and assemble the secondary blade facing out of the blade housing. -
Page 12: Making Sausage
Making sausage All sausage skins may be used with the appliance. When using natural skins, always soften them in water first. Knot one end of the skin before proceeding. Push the sausage skin over the meat funnel. The sausage meat is pushed through the meat funnel to fill the skin. Be sure to leave enough space in the skin to allow the ingredients of the meat sausage to expand during boiling or frying. - Page 13 Meat grinder assembly and operation Attach the mixing bowl without any tools. Cover the blade housing with the protective cover. • Set the connector ring to the Open position. • Attach the cover to the connector ring. • Turn the connector ring the slot towards the Lock position. Remove the blender’s safety cover by pressing the cover towards the LOCK arrow while lifting the cover at the same time.
- Page 14 Blender operation and assembly Note: The blade in the blender is extremely sharp. Never reach into the blender jug once the appliance is assembled. Always handle the appliance with extreme care to avoid possible injury, especially when removing the blade, or emptying and cleaning the blender jug. To prevent possible burns, never pour liquid ingredients hotter than 60°C into the blender.
-
Page 15: Care And Maintenance
If you find that something is missing, please do not assemble. Contact our Customer Service on 021 680 8000. Care and maintenance • Always unplug the appliance from the power supply and set the speed selection knob to ‘0’ before cleaning. •... - Page 16 If you find that something is missing, please do not assemble. Contact our Customer Service on 021 680 8000.
Need help?
Do you have a question about the Evolution HCSM-03M and is the answer not in the manual?
Questions and answers