Page 1
Brought to You by AugustaFlint GEARED WINCH 30905 ASSEMBLY AND OPERATION INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight Tools ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com...
Use eye and hand protection. Always wear ANSI approved impact safety goggles and work gloves when setting up, using and maintaining this product. These are available at Harbor Freight Tools. SKU 30905 Page 2 For technical questions, please call 1-800-444-3353.
Page 3
It must be understood by the user that common sense and caution are factors which cannot be built into this product, but must be supplied by the user. SKU 30905 Page 3 For technical questions, please call 1-800-444-3353.
Page 4
(not provided). Tighten Cable Clamp (15) securely. Before attempting winching operation, make sure cable is wrapped around Reel Shaft (13) at least 3 times. SKU 30905 Page 4 For technical questions, please call 1-800-444-3353.
Page 5
Remove Winch Cable Hook and reel in Cable (19). Maintenance Clean and lubricate all moving parts including gears, rachets, and shafts to insure safe operation. When not in use, keep clean, dry and covered. SKU 30905 Page 5 For technical questions, please call 1-800-444-3353.
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE- MENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 30905 Page 6 For technical questions, please call 1-800-444-3353.