Things to know Double-wide Shelves 3-tier Remove the shelves Shelves should be removed from the frames prior to assembly. Once assembly is finished, unwrap and place the shelves back into the frames. Check the feet Leveling feet should remain all the way in during assembly to avoid damaging the feet.
Page 5
Overview Double-wide Shelves 3-tier Stille units are assembled from the ground up. Shelves are installed last. Step 1...
Page 6
Step 1 Double-wide Shelves 3-tier Place the bottom frame on a level surface.
Leveling Foot Double-wide Shelves 3-tier Once assembly is finished, adjust the leveling feet as needed.
Page 13
2) Tighten the strap to remove slack. Do not over-tighten. Over-tightening the straps may cause your Stille unit to tip backwards. 3) For a neater finish, trim off extra strap with scissors as required.
Need help?
Do you have a question about the Double-wide Shelves 3-tier and is the answer not in the manual?
Questions and answers