Advertisement
Choose "Setup" to set Language or other options:
FIRMWARE AND OTHERS:
1. Update rmware: you maybe need update rmware for this device for
some reason. Copy the rmware le in to USB disk, power o the
device (unplug power jack), plug USB disk to device, power on, the red
REC indicator will ash 7~8 seconds, it means the update is nished.
2. After long time using, you will see the number of recording le
become too big, for example Encode_1080P_234, but you want it be
start from Encode_1080P_0, to do it you just keep press record button
(do not connect USB storage) 4 seconds, when you see the red REC led
ash, the le number will start from 0.
3. Change the date: you may nd out that the date of the recorded le is
not synchronous with your local time. To change the time of PVRC75,
you need create a TXT le name "rtc_setup" (It should be in including
software CD), type your local date and time with following format (for
2014 July 31 11:00:00):
/:2014
/:7
/:31
/:11
/:00
/:00
/:0
9
www.PyleUSA.com
Advertisement
