Product Diagram - Vava VA-CL013 User Manual

Product Diagram

⑤
⑥
⑦
① Top Touch Zone (Brightness Control)
②
Light Cover
③
Blinking LED Indicator
④
Middle Touch Zone (Color Temperature Control)
⑤ USB Charging Port
⑥
Power Button
⑦
Handle
⑧ USB Charging Cable
⑨
Carabiner
①
②
③
④
⑧
⑨
How to Use
Power On / Off
Press and hold the Power Button for 1.5 seconds to power on /
off the night light. When the light is on, adjust the brightness
by tapping on the Top Touch Zone, or adjust the color
temperature by tapping on the Middle Touch Zone. When the
light is powered off, all touch buttons are disabled.
Desktop (Touch Mode)
Brightness Control: Tap and press on the Top Touch Zone to
increase or decrease the light's brightness. The LED
indicator will blink blue when the maximum or minimum
brightness is reached.
Color Temperature Control: Tap and press on the Middle
Touch Zone to adjust the color temperature. The LED
indicator will blink blue when the highest or lowest color
temperature is reached.
Standby Mode: When the light is on, lightly tap on the Top
Touch Zone twice to turn off the light and enter standby
mode. Tap twice again to wake up and turn on the light.
Note: In normal cases, the LED indicator will slowly blink blue
in standby mode for you to easily locate it in the dark. When
the battery is low, the LED indicator will slowly blink red. When
being charged, the LED indicator will fast blink and turn solid
blue once fully charged.
Portable (Manual Mode)
You can use the night light as a portable LED light or
camping lantern. Press the Power Button once to enter
portable mode. In this mode, the Top Touch Zone and Middle
Touch Zone are disabled to prevent wrong operation caused
by accidental bumps.
Brightness Control: Press the Power Button to cycle through
100% full brightness, 50%, and 10% brightness mode.
SOS: When the brightness is set to 10%, press again to
activate SOS mode.
In portable mode, you can tap on the Top Touch Zone twice to
return to the Desktop Mode.
03/04