Download Print this page

Component List; Cleaning Recommendations - DCS PLANAR 450 Installation Manual

Advertisement

PLANAR

COMPONENT LIST

1 x Black polytube 40mm
4 x Black polytube 5mm, to hold wire in masonry slot
2 x Stainless steel grub screws, 4g x 1/4" countersunk head
2 x Black rectangular polycarbonate bushes
TRANSFORMER KIT *TO BE ORDERED SEPARATELY
1 x Ecotimer
1 x Electronic transformer
CORRECT USE OF WATERPROOF WIRENUTS
ends of insulation even.
Do not over torque.
opening while tightening. DO NOT REUSE

CLEANING RECOMMENDATIONS

This bathroom product should not be cleaned with abrasive materials eg. steel wool/scourers. Do not
solvents (terps, meths, thinners) to clean matte black and white coated towel rails. Bleaches can also
discolour products and therefore should not be used.
as SC Johnson 'Pledge' for general polishing and cleaning of the appliance. Fine scratching in polished
towel rails can be removed using the correct metal polish. Recommended brands are 'Autosol' and
page.
ELECTRICIANS
instructions is left with the end user for future reference.
450, 650, 850
3 x Waterproof wirenuts
2 x Large zinc plated self tapping screws, pan head 10g x 50mm
2 x Plastic rawl plugs, for installation on masonry walls
2 x 3m lengths 1mm 2 appliance wire 90 deg C
PLANAR INSTALLATION GUIDE | PAGE
FIGURE 7
4 OF 6

Advertisement

loading

This manual is also suitable for:

Planar 650Planar 850