Sony BRS-200 Operational Manual page 76

Setting menu Setting item
900 OUTPUT.. 930 AUX..
DVI..
PVWMODE.. 933 DSK CLN Off, On
MV..
CK..
SAFETTL.. 936 DISPLAY Off
931 BUS AUX1, AUX2
ANCIL Off, On
BUS Off, On
ENBL
CAM Off, On
MODE
932 BOARD STD, OPTION
BUSSEL AUX1, AUX2, MV, PVW, PGM
RESO
XGA, WXGA,
HD 59.94,
WUXGA
PIP CLN Off, On
934 TYPE 1, 4, 10, 16
WINDOW TYPE1: 1
TYPE4: 1 to 4
TYPE10: 1 to 10
TYPE16: 1 to 16
SIGNAL NONE, IN 1, IN 2, IN 3, IN 4,
IN 5, IN 6, IN 7, IN 8, IN 9, FM
1, FM 2, MAT1, MAT2, CLBR,
PGM, PVW, AUX1, AUX2
935 PGM Off, On
OUT
, O n
BUS SEL PGM, PVW, AUX1, AUX2, MV
CROSS Off, On
SIDE Off, On
CUT
Description
Selects the function and specification of the
AUX1 and AUX2 output connectors.
Allows output of ancillary data superimposed
on an SDI signal without masking when
ANCIL is set to On.
When BUS ENBL is set to Off, the settings
last selected are retained.
When CAM MODE is set to On, the AUX
output image will switch to the same image as
that selected with CAMERA select button 1 to
7.
Note
Ancillary data will not be output from the SDI
signal with FS set to On on menu page 925.
Selects the signal output from the DVI-I output
connector on the Processor Unit or the
optional BRSA-20DD2 output board.
SXGA,
When AUX1 or AUX2 is selected, the same
HD 50, video as that output from the AUX1 or AUX2
connector is output.
Allows you to select the resolution of the
output signal under RESO.
Note
When FORMAT is set to HD on menu page
951, HD 59.94, HD 50 or WUXGA can be
selected under RESO.
HD 59.94 or HD 50 can be selected
depending on the FRAME setting on menu
page 951.
Specifies whether to display DSK or PIP video
in the PVW window when the DSK AUTO or
PIP AUTO button is not lit.
When set to Off, the video is displayed in the
PVW window, and when set to On, it is not
displayed.
Sets the multi-viewer.
Specify the number of the small windows
under TYPE.
To assign the video to each small window,
select a window under WINDOW and specify
a video to be displayed in the small window
under SIGNAL.
Notes
hen TYPE4, TYPE10 or TYPE16 is
selected, the PGM or PVW video assigned
under SIGNAL is delayed by about 1 line
from the videos in other windows.
hen TYPE 1 is selected, the factory-
preset setting is PGM.
Sets whether the cursor and chroma key are
to be superimposed on the PGM output video
when specifying the color of the chroma key
with the cursor.
A o l l w s d
or 90% of the display) of the signal selected
under BUS SEL when DISPLAY is set to On.
Setting CROSS to On allows display of a
cross indication with a frame.
Setting SIDE CUT to On allows display of the
side cuts (vertical lines indicating the position)
with a frame.
76
Technical Appendix
s i l p y a f o a f a r m e n i a s a e f a e r a 8 ( 0 %