Page 2
For solder feed iron. soldering handpiece. PA-SB HT-SB For micro hot tweezers. For HT-A hot tweezers. DS-SB DR-SB For micro desoldering iron. For desoldering iron. All these stands can be connected to the following JBC stations: DI, DD, DM and RM.
Page 3
CL9885 TIP CLEANING STAND The most complete cleaning accessory, allowing you to choose between 3 different cleaning methods: metallic wool, metal brush and sponge. Use the integrated wiper to remove excess solder from the tip, you can tap the tip on the wiper profile or you can wipe any possible particle stuck to the tip using the slots. Due to its weight and antislip bumpers, it is totally self contained, portable and ideal 1 for handed use, there is no need to hold with a hand while you are cleaning the tip S0354...
Page 4
STANDS CABLE COLLECTOR ASSEMBLY Assembly for AD, AP, PA, HT stands. Assembly for DR and DS stands.
Page 5
CHANGING THE HADPIECE CARTRIDGE With the JBC system, the cartridge can be changed quickly, without turning off the station, so you have multiple soldering irons in one. 1 - Insert the cartridge connected to 2 - Insert the cartridge to be used...
Page 6
STANDS CABLE STAND AND SUCTION TUBE EXTENSIONS Suction tube extension kit Ref. A1287 Lenght: 1.5 m Stand cable extension Ref. A1286 Lenght: 1.5 m...
This product should not be thrown in the garbage. WARRANTY The JBC 2 years warranty, guarantees this equipment against all manufacturing defects, covering the replacement of defective parts and all necessary labour. Warranty does not cover product wear due to use or mis-use.